Bedienungsanleitung Marantz M-CR502 (Seite 24 von 38) (Englisch)

61654

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERATIONS

BASIC

SETTINGS

PRACTICAL

CONNECTIONS

ADVANCED OP-

ERATIONS

IF YOU EXPERIENCE

PROBLEMS

MISCELLANEOUS

ADVANCED

OPERATIONS

ENGLISH

ADVANCED OPERATIONS

2. Select a frequency that can be received using

the 1/2 buttons on the unit or the TUNING

3/4 buttons on the remote controller and

then press the ENTER button.

3. Select the preset number in which to

the numeric keys on the remote controller,

and then press the ENTER button.

Note:

Press the ENTER button within 4 seconds after

selecting the preset number. Registration is

canceled if the ENTER button is not pressed within

4 seconds.

CALLING UP REGISTERED BROADCAST

STATIONS

1. Call up a preset number using the ∞/§

buttons on the unit or remote controller.

• Registered stations can also be called up

using the numeric keys on the remote

controller.

DELETING REGISTERED PRESET NUMBERS

1. Preset numbers can be erased by calling

up the number you want to erase and then

pressing the 7 button on the unit.

2. If you want to erase all preset numbers, be

sure to hold down the 7 button on the unit

for 3 or more seconds.

NAMING REGISTERED BROADCAST

STATIONS

Note:

Names can only be given to AM and FM broadcast

stations.

2. 5. 3. 3. 3.

1. Call up the broadcast station you want to

give a name to.

2. Press the MODE button on the unit.

3. Specify the name using alphanumeric

letters (A to Z) and numbers (0 to 9) using

the 1/2 buttons and confirm using the

ENTER button.

• Select the space located between “Z”

and “0” to enter a space.

• Press the 7 button on the unit to erase

the last character entered.

• Hold down the 7 button on the unit for 3

or more seconds to erase all characters.

4. Repeat Steps 1. through 3. about until

you have entered all characters.

5. Register the name by pressing the MODE

button.

FM RECEPTION MODE

When FM is selected as the tuner band, it may

sometimes be difficult to receive broadcasts in

stereo when the signal is weak. In such cases,

be sure to switch the FM reception mode to

mono. This will help alleviate noise and make the

frequency easier to listen to.

1. 2. 3.

2. 3.

1. Press the MODE button on the unit for 3 or

more seconds or the SET UP button on the

remote controller.

2. Select “FM STEREO/MONO” from the

menu by pressing the 1/2 buttons on the

unit or the VOLUME buttons on the remote

controller and then press the ENTER

button.

3. Select “MONO” using the 1/2 buttons

on the unit or the VOLUME buttons on

the remote controller and then press the

ENTER button.

• The default setting is STEREO.

Note:

FM reception mode settings can only be made when

the FM band is selected for the tuner.

M-CR502_T_DAB_01_ENG.indd 22M-CR502_T_DAB_01_ENG.indd 22 09.2.4 1:35:37 PM09.2.4 1:35:37 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz M-CR502 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info