Bedienungsanleitung Marantz M-CR502 (Seite 30 von 38) (Englisch)

61654

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERATIONS

BASIC

SETTINGS

PRACTICAL

CONNECTIONS

ADVANCED OP-

ERATIONS

IF YOU EXPERIENCE

PROBLEMS

MISCELLANEOUS

ADVANCED

OPERATIONS

ENGLISH

ADVANCED OPERATIONS

ERASING A PRESET NUMBER

1. Display the preset number that you want

to erase by pressing the ∞/§ buttons, and

press the 7 button on the unit.

2. “Clear?” is displayed on the display panel.

3. Press the 7 button on the unit within 4

seconds to erase the preset number.

• If you want to erase all the preset numbers, press

the 7 button on the unit for 3 or more seconds

while a broadcast is being received.

SWITCHING THE DAB INFORMATION

DISPLAY

You can display information about the DAB station

to which you are listening.

The following information is displayed in turn each

time the FOLDER/CURSOR 3/4 buttons on the

remote controller are pressed.

q DLS (Dynamic Label Segment):

The text data included in the broadcast scrolls.

↓

w Program Type:

The category of the broadcast being recived

is displayed.

↓

e Ensemble Name:

The ensemble name is displayed.

↓

r Time and Date:

The current time and date are displayed.

↓

t Audio information:

The bit rate and mode of the broadcast

being recived is displayed.

↓

y Channel and frequency:

The frequency is displayed.

↓

u Bit Error Rate (0-100):

The higher the ﬁ gure, the better the quality

of the received broadcast.

SETTING AMP

CHARACTERISTICS (SPEAKER A, B)

• Amp properties can be changed according to the

location speakers are installed.

• Five types of characteristics can be selected.

• Different characteristics can be selected for

Speaker A and Speaker B.

1. 2. 3.

2. 3.

1. Press the MODE button on the unit for 3 or

more seconds or the SET UP button on the

remote controller.

2. Select “SPK A” or “SPK B” from the menu

using the 1/2 buttons on the unit or the

VOLUME buttons on the remote controller

and then press the ENTER button.

3. Select the desired characteristics from the

list below using the 1/2 buttons on the unit

or the VOLUME buttons on the remote

controller and then press the ENTER

button.

• FLAT

• RESPONSE 1

• RESPONSE 2

• RESPONSE 3

• RESPONSE 4

• The default setting is FLAT.

A description of characteristics is given below.

• FLAT

Properties are ﬂ at.

This enhances bass frequencies when speakers are

placed directly on furniture or on a rack.

If you feel that there is too much bass, select your

favorite properties from among RESPONSE1 to

RESPONSE4.

• RESPONSE 1

Cuts low frequencies 60 Hz or under by –12 dB/

oct.

• RESPONSE 2

Cuts low frequencies 100 Hz or under by –12

dB/oct.

• RESPONSE 3

Cuts low frequencies 60 Hz or under by –12 dB/

oct.

Also, raises the 400 Hz region by 3 dB.

• RESPONSE 4

Cuts low frequencies 100 Hz or under by –12

dB/oct.

Also, raises the 400 Hz region by 3 dB.

M-CR502_T_DAB_01_ENG.indd 28M-CR502_T_DAB_01_ENG.indd 28 09.2.4 1:35:41 PM09.2.4 1:35:41 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz M-CR502 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info