Bedienungsanleitung Marantz NR1601 (Seite 62 von 84) (Englisch)

453907

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKAENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA

Operating learn mode

This remote control unit is capable of learning and storing codes used

by other remote controls that you already own.

For codes which are not learned, the remote control unit will transmit

either the Marantz preset codes from the initial settings, or remote

codes from another manufacturer’s AV equipment which is set by the

customer.

The receiver sensor for the remote control unit signals is located at the

top of the remote control unit.

This remote control unit is capable of learning around 160 codes.

NOTE

The learning procedure does not operate correctly if the batteries have

become worn.

n Learning procedure

Place the remote control unit so that its infrared

signal transmitter is facing the infrared signal

receiver on the Marantz remote control unit at a

distance of about 5 cm.

Press and hold down SET and

SOURCE SEL until the LEARN

indicator blinks.

Press input source select

buttons to select the input

source.

Select the button to be learned.

LEARN indicator lights up.

NOTE

• The learning function is unavailable for all SOURCE and D.MODE in

any mode.

• The learning function is unavailable for all buttons in TUNER mode

and AMP mode.

Press and hold the button of the original remote

control unit to be learned until the SEND indicator

blinks twice.

NOTE

• If the SEND indicator blinks once, repeat this step.

• If the LEARN indicator ﬂashes when the SEND indicator is lit, then

the button cannot be learned.

• When the memory of the remote control unit is full, the LEARN and

SEND indicators blink once. If you want to learn the code, you need

to erase a different learned button.

Repeat steps 4 and 5 to learn other buttons for the

same input source.

Repeat steps 3 to 6 to learn other input sources.

When programming of the remote control unit is

completed, press SET.

The LEARN display disappears, and the remote control unit

exits learn mode.

NOTE

• When the SEND indicator blinks once again, the transmitting code

is unavailable for remote control unit, or the transmitting signal has

been interrupted by noise.

• If no buttons are pressed for approximately 1 minutes while in the

LEARN mode, the remote control unit automatically exits from the

LEARN mode.

n Erasing programmed codes

Codes can be erased in three ways: by buttons, sources, and by all

memory contents.

Erasing the code by buttons

Press and hold down SET and

SOURCE SEL until the LEARN

indicator blinks.

Press input source select buttons

to select the input source you

want to delete.

Press and hold down D.MODE

and press the learned button to

be erased twice.

SEND indicator blinks twice and the

mode returns to LEARN mode.

To return the normal mode, press SET.

Erasing the code by SOURCE

Press and hold down SET and

SOURCE SEL until the LEARN

indicator blinks.

Press and hold down D.MODE

and press the learned input

source select buttons to be erased

twice.

LEARN indicator lights.

Press ENTER to continue erasing.

• The SEND indicator blinks twice and

the mode returns to LEARN mode.

• To cancel the erasing operation, do not

press ENTER, and simply press any

other button.

To return the normal mode,

press SET.

5 cm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz NR1601 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz NR1601

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info