Bedienungsanleitung Marantz PM-7001 (Seite 11 von 20) (Holländisch)

6531

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

ENGLISH

REAR PANEL

NAMES AND FUNCTIONS OF PARTS

A PHONO Input jacks

These jacks are for connecting to an analog record player.

MM cartridges can be used.

B PHONO GND terminal

Connect the grounding wire from an analog record player.

C PRE OUT jacks

These jacks are for connecting to the input jacks of an-

other main-amplifier or active subwoofer.

D MAIN IN jacks

These jacks are for connecting to the output terminals of

another pre-amplifier when using the PM7001 as the main-

amplifier. In this case, set the SEPARATE switch H to the

ON position.

E SPEAKERS SYSTEM 1, 2 output terminals

You can connect 2 speaker systems, SPEAKERS 1 and

SPEAKERS 2 E. Speaker output can be turned ON/OFF

from the SPEAKERS 1 and 2 buttons o on the front panel.

F AC IN socket

Connect the supplied AC power cable to this socket and a

power outlet.

G REMOTE CONTROL jacks

These jacks are for connecting to other Marantz

components such as a CD player or DVD player that has a

remote control connector (D.BUS jack).

You can use the remote controller supplied with the PM7001

to control the system.

For more details, see page 13.

MODEL NO. PM7001

SYSTEM 1 OR SYSTEM 2 4SYSTEM 1 OR SYSTEM 2 4

16 OHMS16 OHMS

SYSTEM 1 AND SYSTEM 2 8SYSTEM 1 AND SYSTEM 2 8

16 OHMS16 OHMS

SPEAKERSSPEAKERS

MAIN INMAIN IN

PRE OUTPRE OUT

GNDGND

CDCD AUXAUX

DVDDVD

TUNERTUNER

OUTOUTININ

RECORDER 1RECORDER 1

OUTOUTININ

RECORDER 2RECORDER 2

AC INAC IN

OFFOFF

SEPARATESEPARATE

OUTOUT

ININ

REMOTEREMOTE

CONTROL CONTROL

SERIAL NO.SERIAL NO.

PHONOPHONO

ONON

SYSTEM 1

SYSTEM 2

A C D E F

JKLM

H SEPARATE switch

This switch is used for selecting the pre-amplifier and main-

amplifier connection modes.

OFF: Select this position when the amplifier is used as a

normal integrated amplifier. (Standard factory set-

ting)

ON: The pre-amplifier and main-amplifier are separated.

The PM7001 can be used as a main-amplifier when

input is connected to the MAIN IN jacks D.

I RECORDER 1/RECORDER 2 output jacks

These jacks are for connecting to the recording input jacks

of a CD-R recorder, MD deck, tape deck, etc. Output sig-

nals can be selected using the REC SELECTOR knob !2

on the front panel.

J RECORDER 1/RECORDER 2 input jacks

These jacks are for connecting to the output jacks of a CD-

R player, MD deck, tape deck, etc.

K AUX/DVD input jacks

These jacks are for connecting to the output jacks of a

DVD player or other LINE component.

L TUNER input jacks

These jacks are for connecting to the output jacks of a

tuner or other LINE component.

M CD input jacks

These jacks are for connecting to the output jacks of a CD

player or similar component.

!3 Infrared Receptor Window

This is the receptor of control signals sent from the

RC4001PM remote controller. Point the remote controller

towards this window to properly transmit signals.

!4 PHONES jack

This jack is for connecting headphones with a standard

stereo plug. To listen with headphones, turn the speaker

output OFF by setting the SPEAKERS 1 and 2 buttons o

in the OFF position.

PM7001U 01 Eng(P06-P15) 06.1.19, 4:03 PMPage 7 Adobe PageMaker 6.5J/PPC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz PM-7001 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz PM-7001

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info