Bedienungsanleitung Marantz PM4400 (Seite 6 von 13) (Englisch)

522815

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

English

!5 MUTING INDICATOR

Light up when the MUTING button in the remote control unit is

pressed.

NOTE:

Be sure to check the VOLUME control setting before pressing

this switch to cancel muting. If the muting is canceled while the

volume setting is high, the speakers could be damaged.

!6 LOUDNESS SWITCH

The LOUDNESS switch compensates for human hearing char-

acteristics by boosting the bass and treble response at low

volume levels to achieve a more pleasing tonal balance.

!7 VOLUME CONTROL

Adjusts the volume level. Turn the knob clockwise to increase the

volume.

!8 BALANCE CONTROL

Turn the knob to correct an unbalanced program source such as

stereo broadcast or to vary the output level of the left or right

channel. Note that, if the BALANCE control is turned fully in one

direction, the sound will not be heard from the speaker on the

other side.

!9 SPEAKERS 1 / 2 SWITCHES

These switches are used to select the speaker system(s)

connected to the SPEAKER SYSTEM 1 / 2 terminals on the rear

panel. If both the 1 and 2 switches are pressed to the low

positions, two speaker systems can be used at the same time.

When headphones are used for listening, set both switches 1 and

2 to OFF (high positions).

@0 BASS AND TREBLE TONE CONTROLS

Adjusts the tone by controlling the levels of two frequency bands.

Turn each control toward (+) to enhance the corresponding

frequency band, or toward (–) to attenuate it.

TREBLE: Adjusts the high frequency level.

BASS: Adjusts the low frequency level.

@1 REC SELECTOR SWITCH

Selects the tape dubbing mode between tape decks or the signal

output at the REC OUT jacks.

@2 REMOTE SENSOR

The remote sensor receives the infrared commands from the

remote control unit. When an infrared signal is received from the

remote control unit. The remote control unit must always be

pointed directry at the remote sensor.

@3 PHONES JACK

Insert the standard phone plug of the headphones into this jack.

CONTROLS, CONNECTORS,

AND INDICATORS

(Figure 2)

q PHONO INPUT JACKS

Connect the output jacks of a turntable to these jacks.

w GND (GROUND) TERMINAL

Connect the grounding wire from the turntable to this terminal.

e CD PLAYER INPUT JACKS

Connect the output jacks of a Compact Disc player to these jacks.

r TUNER INPUT JACKS

Connect the output jacks of the tuner to these jacks.

t AUX/DVD INPUT JACKS

These are auxiliary input jacks which can be used to connect the

audio outputs of AV components such as DVD players, TV

multiplex/stereo audio tuners, VCRs, and laserdisc players.

y MD/TAPE IN/OUT JACKS

Connect the play (output) jacks and record (input) jacks of MD or

tape decks to these jacks.

u CD-R IN/OUT JACKS

Connect the play (output) jacks and record (input) jacks of CD

Recorder to these jacks.

i SPEAKER SYSTEMS 1 / 2 TERMINALS

Connect your speaker system(s) to these terminals.

o REMOTE CONTROL BUS TERMINALS

(REMOTE CONT. BUS)

Another item of audio equipment with a remote control bus

terminal can be connected to these terminals by using a special-

purpose cable. The bus OUT terminal is used to send signals to

another item of equipment. The bus IN terminal is used to receive

signals from another item of equipment.

!0 POWER CORD

Connect to a household power outlet.

!1 POWER SWITCH

Pressing once switches the power ON, and pressing again

switches it OFF.

The POWER indicator lights when the POWER switch is ON, and

go out when the POWER switch is OFF.

!2 INPUT SELECTOR

Selects the program source to be recorded or played from the

PHONO, CD, TUNER, AUX/DVD, CD-R, and MD/TAPE.

!3 STANDBY INDICATOR

Lights up when the unit is in the stand-by mode.

!4 TONE DEFEAT SWITCH

¡ When the switch is not depressed, the audio signals are

applied to the tone control circuit and the tone can be adjusted

using the tone control knob.

¡ When the switch is depressed, the audio signals bypass the

tone control circuit and the tone control knob does not function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz PM4400 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz PM4400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info