Bedienungsanleitung Marantz PM6003 (Seite 9 von 20) (Englisch)

453878

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERATION

ADVANCED

CONNECTION

REMOTE CONTROLLER

OPERATION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTIONS

ENGLISH

NAMES AND FUNCTIONS

FRONT PANEL

q POWER SWITCH

Pressing once switches the power ON, and pressing

again switches it OFF.

If the POWER switch is in the ON position, the

power of this unit can be turned ON/OFF by pressing

the POWER button on the remote controller.

w STANDBY INDICATOR

Lights up when the unit is in the standby mode.

e INPUT SELECTOR

Selects the program source to be recorded or

played from the PHONO, TUNER, CD, AUX/DVD,

RECORDER 1 (CD-R), and RECORDER 2 (MD/

TAPE).

r SOURCE DIRECT button and

indicator

This button turns SOURCE DIRECT mode ON and

OFF. When SOURCE DIRECT is ON, the center of

the button is lit. In the Source Direct mode, the

audio signals bypass the tone control circuit.

t FUNCTION INDICATORS

One of the indicators lights up to indicate the input

source selected with the INPUT SELECTOR.

y MUTE INDICATOR

Light up when the MUTE button in the remote

controller is pressed.

Note

Be sure to check the VOLUME control setting

before pressing this switch to cancel muting. If the

muting is canceled while the volume setting is high,

the speakers could be damaged.

u VOLUME CONTROL

Adjusts the volume level. Turn the knob clockwise

to increase the volume.

i REMOTE SENSOR

The remote sensor receives the infrared commands

from the remote controller. When an infrared signal

is received from the remote controller. The remote

controller must always be pointed directly at the

remote sensor.

o BALANCE CONTROL

Turn the knob to correct an unbalanced program

source such as stereo broadcast or to vary the

output level of the left or right channel. Note that, if

the BALANCE control is turned fully in one direction,

the sound will not be heard from the speaker on the

other side.

!0 LOUDNESS button and indicator

This button turns LOUDNESS ON and OFF. When

LOUDNESS is ON, the center of the button is lit.

The LOUDNESS compensates for human hearing

characteristics by boosting the bass and treble

response at low volume levels to achieve a more

pleasing tonal balance.

!1 SPEAKERS A/B buttons and

indicators

These buttons turn the speaker output to the

speakers connected to the SPEAKER SYSTEMS

A/B terminals on the rear panel ON and OFF. When

speaker output is ON, the center of the button is

lit. To listen with headphones, turn speaker output

OFF.

!2 BASS AND TREBLE TONE

CONTROLS

Adjusts the tone by controlling the levels of two

frequency bands. Turn each control toward (+) to

enhance the corresponding frequency band, or

toward (–) to attenuate it.

TREBLE: Adjusts the high frequency level.

BASS: Adjusts the low frequency level.

!3 PHONES JACK

Insert the standard phone plug of the headphones

into this jack.

PM6003_N_01_Eng_New.indd 4PM6003_N_01_Eng_New.indd 4 09.4.20 3:57:53 PM09.4.20 3:57:53 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz PM6003 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz PM6003

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info