Bedienungsanleitung Marantz PM6003 (Seite 17 von 20) (Englisch)

453878

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERATION

ADVANCED

CONNECTION

REMOTE CONTROLLER

OPERATION

TROUBLESHOOTING

OTHERS

REMOTE CONTROLLER

OPERATION

TROUBLESHOOTING

ENGLISH

REMOTE CONTROLLER OPERATION

REMOTE CONTROL CODE

SETTING

The remote control unit contains 3 sets of remote

control codes, and it can be used to control up to

3 ampliﬁ ers in one location. To control a second

or third ampliﬁ er, select the remote control code

as explained below. The selected ampliﬁ er can be

operated from the remote control.

• When the unit is shipped from the factory, the

main unit and remote control are set to AMP1.

1. AMP2

To set the remote control to AMP2, hold

down both the AMP button z and 2 number

button x on the remote control for at least

ﬁ ve seconds.

AMP3

To set the remote control to AMP3, hold

down both the AMP button z and 3 number

button x on the remote control for at least

ﬁ ve seconds.

2. Also set the main unit's remote control

setting to the same setting as the remote

control.

3. To change main unit's remote control

setting, hold down the AMP button z

and press the DISPLAY button c on the

remote control; the remote control setting

will be indicated by function indicators on

the main unit and main unit setting will be

changed same setting as remote control.

AMP1 : PHONO indicator blink 3 times.

AMP2 : TUNER indicator blink 3 times.

AMP3 : CD indicator blink 3 times.

Note

• If the main unit is unplugged the mains cord, the

remote control setting will revert to AMP1.

• To set the remote control back to AMP1, hold

down both the AMP button z and 1 number

button x on the remote control for at least ﬁ ve

seconds.

TROUBLESHOOTING

In case of trouble or abnormal operation of the unit, check the following before contacting service personnel.

What may seem to be a serious malfunction is often the result of a simple operation mistake. If the trouble

persists after checking the following, please contact your dealer or nearest Marantz distributor.

* The ampliﬁ er does not operate and the

indicators do not light.

1. Check to see if the power cable is inserted

properly into the power outlet.

* The indicators light but the amplifier

does not operate.

1. Check to see if the SELECTOR, SPEAKER

switches and VOLUME control are properly

set.

* Sound is heard from only one of the

speakers.

1. Check to see if the BALANCE control is

properly set.

2. Switch the power of the unit to OFF, and

change the connections of the left and right

speaker cords. If the sound from the same

speaker is still not heard, its connection

cord or the speaker itself may be defective.

* Considerable hum noise is heard when

the turntable is played.

1. Check to see if the plugs from the turntable

are properly connected to the PHONO

jacks.

2. Connect the grounding wire of the turntable

to the GND terminal on the rear panel of

this unit. If it has already been connected,

try removing it.

3. Check to make sure that the phono cartridge

is attached securely to the tonearm.

4. Unplug the power cable and plug it in

again after inverting the orientation of the

blades.

Remote control operation is not possible.

1. Is the remote controller's transmitter

pointed correctly at the remote sensor on

the front of the Ampliﬁ er?

Or, is there an obstruction between the

transmitter and the remote sensor?

2. Are the batteries in the remote controller

exhausted?

3. Is there another strong light (from a window,

etc.) striking the Ampliﬁ er remote sensor?

4. Is an RCA cord connected to the “REMOTE

CONTROL OUT” jack on the Ampliﬁ er rear

panel?

5. Is the remote control code different between

the main unit and remote controller?

6. Is the main unit remote sensor disabled?

PM6003_N_01_Eng_New.indd 12PM6003_N_01_Eng_New.indd 12 09.4.20 3:57:55 PM09.4.20 3:57:55 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz PM6003 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz PM6003

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info