Bedienungsanleitung Marantz PMD351 (Seite 8 von 27) (Englisch)

22851

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

ENGLISH

DOLBY HX PRO HEADROOM EXTENSION

The Dolby HX PRO system monitors the total amount

of effective bias during recording and instantaneously

compensates for any excess bias by reducing the

deck’s bias signal level accordingly. The system

operates independently on each channel. HX PRO is

unlike a noise reduction system because it functions

only during recording and no decoding is required.

Therefore a tape recorded with the HX PRO system

can be played back on any other cassette deck while

retaining the benefits of HX PRO.

- 8 -

FRONT PANEL CONTROLS

AND DISPLAYS

Power switch button

Push the POWER switch in to turn power to the

unit on and off. When power is turned off, all past

settings are removed from memory and the unit

returns to its default setting upon the next power

up.

EJECT button

Press the eject button to open the cassette tape

holder. The EJECT button will not function unless

the tape deck is in the stop mode. Thus, if the

power is turned off without hitting the STOP

button, the door may not open.

CASSETTE TAPE HOLDER

This section holds the cassette tape for tape Play

and Record functionality. Tapes that have the

record protect knock-out removed will not enter

into the record mode.

TAPE PITCH control

Rotate the TAPE DECK pitch control to adjust the

tape deck playback pitch from -12% to +12%.

While the control is in the center detent position,

the tape deck is at normal (0% pitch variance)

speed. This control has no effect on the tape

pitch during the record mode.

DISPLAY

See next section for description of display

elements.

TAPE COUNTER buttons

The MEMO button 6 and RESET button 7

control the tape counter (DISPLAY a ). The tape

counters are only approximate measurements of

minutes and seconds and are not intended for

timing-critical applications. They are most accu-

rate with 60 minute tapes.

MEMO button

Press the MEMO button to store a memory point

into the counter memory. Once this point is set,

the tape deck will rewind or fast forward until it

reaches this point in the tape and will stop. To

cancel the memory control, press the MEMO

button again.

RESET button

Press the RESET button to reset the current tape

counter reading from its existing point to “0000”

DUBB button

Press the DUBB button to engage the tape

transport into the dubbing mode from the CD

player. Once the DUBB button is pressed, the

CD player will copy directly to the tape deck.

REC indicator

Displayed when the tape deck is in the Record

mode. When the REC indicator is flashing, this

indicates the tape deck is in the Record Pause

mode.

REC/PAUSE button

Press the REC/PAUSE button to engage the

tape transport into the record pause mode. In this

mode, the tape deck is armed to begin recording.

The tape record mode can be engaged by

pressing the forward play or reverse play but-

tons.

IR sensor

Sensor for receiving infrared remote control

signals. Model RC330 IR control emitter is

available from Marantz Professional.

TAPE DECK AND CD PLAYER CONTROLS

TAPE

PLAY PAUSE

STOP

PLAY

TAPE DECK CONTROL buttons

REWIND button

Press the REWIND button to engage the

tape transport into fast rewind mode from the

right (take-up) to the left (supply) reels.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz PMD351 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info