Bedienungsanleitung Marantz PS17 (Seite 32 von 44) (Englisch)

522805

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

ENGLISH

. VOLUME up / down buttons

Used to adjust the volume on amplifier and other components

equipped with volume control.

⁄0 CURSOR/TRANSPORT CONTROL buttons

Used to operate on-screen and other displays used by amplifier and

other components, as well as to operate the PLAY, STOP, PAUSE,

NEXT, and PREVIOUS functions of each source.

⁄1 < • 3 (CURSOR/ TRANSPORT

CONTROL switching) button

Used to switch the function of the CURSOR/ TRANSPORT CONTROL

buttons ⁄0 between the CURSOR and TRANSPORT CONTROL

functions, with the currently selected function displayed on the LCD

when the DVD, LD, or VCR functions are selected. When functions

other than DVD, LD, or VCR are selected, the < • 3 button remains

inactive.

⁄2 Channel up / down buttons

Used to controls the up/down function of tuner, or to cycle through the

tuner presets.

⁄3 MUTE button

Used to temporarily mute the sound for preamplifiers, receivers, etc.

⁄4 GUIDE button

Used to call up the on-screen menus used to control DVD players,

digital satellite systems (DSS), and other menu-equipped systems.

⁄5 CLEAR button

Used to clear the contents of memory or programmed functions.

⁄6 MEMO button

Used to program your CD player’s track memory, or to enter a VCR

recording program, and can be used to provide the MEMO function

included with other components in your system.

⁄7 Ten-Key pad/Surround Mode buttons

Used to enter numeric digits, useful for finding a specific track on a

CD or DVD, etc. When the function is set to AMP, it is possible to

choose Surround Mode, etc.

⁄8 Infrared Transmitter/Receiver Window

Used to transmit remote control signals based on beams of infrared

light to system components. To ensure that these signals are

properly received, make sure that this window is pointing in the

general direction of the infrared receiver on the amplifier or other

components. This window should also be pointed toward the source

remote controller when using Programmable Learning function.

Note:

The MODE z, MACRO x, Jog Dial n and < • 3 (CURSOR/

TRANSPORT CONTROL switching) ⁄1 cannot be programmed.

LCD (Liquid Crystal Display)

Information about currently selected functions and modes is

displayed on the LCD. Pressing any buttons will call up a full display

of information on the status of that function or mode. This display will

disappear after approximately 1 minute, except for the Function

Name indicator a, which is always displayed.

a Function Name indicator

Displays the name of the currently selected function (LD, TV, etc.)

using up to 5 characters.

b Command Name indicator

Displays up to 10 types of commands for each function using up to 5

characters.

c Command Page indicator

Allows confirmation of current command page. Also, when setting or

transmitting macros, displays information such as the number of

macro steps and the time intervals between command transmissions.

d Transmission indicator

Indicates when the remote controller is transmitting a signal.

e USE indicator

For normal operation the USE indicator is displayed.

f LEARN indicator

Indicates when the remote controller is in the LEARN mode.

g NAME indicator

Indicates when the remote controller is in the NAME mode and a

function name is being changed.

h MACRO indicator

Indicates when the remote controller is in the MACRO mode.

i CURSOR indicator

Indicates when the CURSOR/TRANSPORT CONTROL button is in the

cursor mode.

j CONTROL indicator

Indicates when the < • 3 (CURSOR/TRANSPORT CONTROL

switching) ⁄1 is in a transport control mode such as PLAY, STOP, etc.

• If the LCD flickers when a button is pressed in order to transmit a

command or when in the LEARN mode, the transmission or

learning is not possible. In such a case, please replace the

batteries.

• This remote controller uses non-volatile memory, so that learned

codes and macros will be preserved even if the batteries are

removed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz PS17 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info