User Guide
5
Using Non-Rechargeable AA Batteries
Warning Use the recharging dock only with the Philips NiMH
rechargeable battery pack. It cannot be used with AA batteries.
1 Slide the battery door off the back of the RC5000i.
2 Install the plastic AA battery tray
in the battery compartment.
3 Insert four AA batteries as
indicated on the bottom of
the battery compartment.
4 Slide the battery door back on.
After a few seconds, the RC5000i starts up automatically and
beeps twice to indicate that it has finished starting up.
Note The RC5000i retains all settings when the AA batteries have run
out. You will only have to reset the clock.
Introduction
