Bedienungsanleitung Marantz SA-11S3 (Seite 18 von 34) (Englisch)

513679

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

ENGLISH

Playing tracks in a speciﬁc order

(Program playback)

During stop mode, press

PROGRAM.

“PROG” lights in the display, and

the mode switches to program

playback mode.

Use NUMBER (0 – 9, +10) to

select the tracks you want to

program.

Example

To program tracks 3 and 12 to be played

in that order, press 3, +10, and 2 one

after the other.

Press 1.

Playback starts in the programmed order.

n Adding tracks for program playback

Tracks can be added to the end of program when program

is remaining (“PROG” indicator is lighting up) and in stop

mode.

Use NUMBER (

0 – 9, +10) to select the tracks you want to

program.

n Checking programmed track orders

While stopped, press 9.

Each time you press it, tracks are displayed in the order in

which they are programmed.

n Canceling a track from program playback

While stopped, press CLEAR.

When

CLEAR is pressed, tracks are deleted in order from

the last programmed track.

n Clearing the all programmed track

Press PROGRAM during stop mode.

•Program can also be cleared by pressing

OPEN/CLOSE to

open the disc tray.

You can specify up to 20 tracks each for program playback.

NOTE

•Programmed playback is not possible with MP3 and WMA

ﬁles.

•The program playback mode is canceled if you set power to

standby, turn off power, or open the disc tray.

Stopping digital outputs

Stops all media and source digital signal outputs from the

rear panel’s digital audio output connectors (COAX., OPT.) to

minimize digital audio output circuit noise which could interfere

with the analog audio output signal.

During stop mode, press MENU.

Use ui to select “Digital Out”,

and press ENTER.

Use ui to select “Off”, and

press ENTER.

[Selectable items]

: Outputs the digital signal.

Off

: Digital signal is not output.

•When digital output is turned off, the “D OFF” indicator

lights up on the display.

•The “digital output off” has a memory retention function

where the settings remain stored and unchanged even when

the disc is changed or the power is turned off.

NOTE

This unit does not output Super Audio CD multi-channel layer

and stereo layer digital audio signals from the digital audio

output connectors.

Playback CDs

Playing in random order (Random playback)

During stop mode, press

RANDOM.

The “RNDM” indicator on the

display lights.

Press 1.

The tracks start playing in random

order.

n Stopping Random Playback

Press RANDOM during stop mode.

The “RNDM” indicator on the display goes off.

NOTE

•Each press of

9 during random play changes the track

in random manner.

•The random playback mode is canceled if you set power

to standby, turn off power, or open the disc tray.

1.SA-11S3U_ENG_0525.indd 15 2012/05/25 20:09:05

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SA-11S3 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SA-11S3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info