Bedienungsanleitung Marantz SA-11S3 (Seite 30 von 34) (Englisch)

513679

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

ENGLISH

[USB/iPod]

Problem Cause Corrective action Page

“USB OC” appears

on the display.

•The voltage able to be

supplied from this unit via

the USB memory device

has been exceeded.

•The USB memory device

is not supported. Please

use a USB memory

device with an operating

current that is less than

1 A.

•To clear the “USB OC”,

remove the USB memory

device and turn this unit

off and on.

–

“Empty” appears on

the display.

•No ﬁle able to be played on

this unit exists.

•Check supported formats. 18

The sound of the USB

memory device being

connected is not

heard.

•The ampliﬁer and speakers

are not connected properly.

•Connect the cables

correctly. (See the

instruction manual for the

ampliﬁer.)

–

•The ampliﬁer power is not

ON.

•Turn the ampliﬁer power

ON. (See the instruction

manual for the ampliﬁer.)

–

•The ampliﬁer’s function

or selector switch is not

set to “CD” or “AUX” or

such (to whatever you have

connected this unit to).

•Switch the ampliﬁer’s

function or selector

switch to “CD” or “AUX”

or such (to whatever you

have connected this unit

to). (See the instruction

manual for the ampliﬁer.)

–

•The ampliﬁer’s volume

control is set at the

minimum level.

•Adjust the ampliﬁer

volume. (See the

instruction manual for the

ampliﬁer.)

–

Problem Cause Corrective action Page

The sound of the iPod

being connected is

not heard.

•The ampliﬁer and speakers

are not connected

correctly.

•Connect the cables

correctly. (See the

instruction manual for the

ampliﬁer.)

•The ampliﬁer power is not

ON.

•Turn ON the power to

the ampliﬁer. (See the

instruction manual for the

ampliﬁer.)

–

•The ampliﬁer’s function

or selector switch is not

set to “CD” or “AUX” or

such (to whatever you have

connected this unit to).

•Switch the ampliﬁer’s

function or selector

switch to “CD” or “AUX”

or such (to whatever you

have connected this unit

to). (See the instruction

manual for the ampliﬁer.)

–

•The ampliﬁer’s volume

control is set at the

minimum level.

•Adjust the ampliﬁer

volume. (See the

instruction manual for the

ampliﬁer.)

–

Reading of USB

memory device takes

time.

•When connecting a high-

capacity USB memory

device, it will take time

to read depending on its

capacity. Several minutes

may be required for reading

when using a high-capacity

device.

•Wait until reading is

completed.

–

Power fails to switch

on when the remote

controller’s

CD is

pressed.

•The unit’s power switch

is off.

•Press the unit’s power

operation switch.

•Or, press the unit’s

power operation switch,

then press the remote

controller’s

CD.

1.SA-11S3U_ENG_0525.indd 27 2012/05/25 20:09:09

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SA-11S3 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SA-11S3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info