Bedienungsanleitung Marantz SA17S1 (Seite 22 von 27) (Englisch)

522845

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

ENGLISH

To Check Programmed Tracks

Press SCROLL/RECALL button on the remote while

programming or program play (when “PROG” indicator is

blinking or lighting up). Programmed tracks will be displayed

in programmed order.

To Delete a Programmed Track

q Press SCROLL/RECALL button in stop mode when

program has been made (when “PROG” indicator lights

up or blinks). Programmed tracks will be displayed in

programmed order.

w When the track you want to delete appears on the display,

press CANCEL button on the remote at once. The deleted

track’s track number indicator will disappear.

To Clear Whole Program

Press 7 STOP button two times while in program play. In stop

mode, press 7 STOP or CANCEL button once.

Program can also be cleared by pressing 0 OPEN/CLOSE

key to open the disc tray.

To Add Tracks to Program

Press PROGRAM button when program is remaining (“PROG”

indicator is constantly lights up) and in stop mode. “PROG”

indicator will blink and tracks can be added to the end of

program.

* Please be careful about the following matters.

• When programming 1st to 9th tracks in a disc that has

over 10 tracks by using numeric buttons,. For instance,

programming the 3rd track after programming the 1st track,

press 3 button more than approximately 1.5 seconds after

1 button is pressed.

• Likewise, when programming a track at 10th or after. For

example, to program 13th track, press 3 button within

approximately 1.5 seconds after 1 button is pressed.

• When programming a track in a disc that has less than 9

tracks. For instance, to program the 5th track after 4th track

has been programmed, press 5 button more than

approximately 0.5 second after 4 button is pressed.

• When programming with 4 and ¢ buttons, press the

buttons repeatedly until the track you want appears. And

the gap has to be less than 0.5 second.

Searching your favorite tracks

(AMS (Automatic Music Scan) Play)

If AMS button on the remote is pressed in stop mode or in

playback mode, PLAY “3” indicator will blink and the

beginnings of all the tracks will be played for 10 seconds

each starting from the first track. This feature is convenient to

search where your favorite track is.

When you have found the favorite track, press AMS button

again. PLAY indicator will light up constantly and normal

playback will begin from the current track.

* If AMS button is pressed after tracks have been

programmed, only the selected tracks will be played with

AMS.

Q&A

• How many tracks can be programmed?

Up to 30 tracks can be programmed for program

play.

• Can I listen to program play repeatedly?

Press REPEAT button once. “RPT” indicator will light

and program play will be repeated.

• Can I shuffle the programmed track order?

Press RANDOM button during program play or in

stop mode.

Blinks

TRK

34 56 78 910 1112 1314 15

OPERATION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SA17S1 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info