Bedienungsanleitung Marantz SA8004 (Seite 28 von 32) (Englisch)

522861

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

ENGLISH

GUSB memory device/iPodH

Problem Cause Corrective action Page

“OverCurrent” appears

on the display.

• The voltage able to be supplied

from this unit via the USB

memory device has been

exceeded.

• The USB memory device

is not supported. Please

use a USB memory

device with an operating

current that is less than

1 A.

–

“FAT Error” or “Cluster

Err” appear on the

display.

• An unsupported ﬁle system

is being used. USB memory

device below 128 MB cannot

be supported.

• Please use a USB memory

device formatted with a

compatible ﬁle system

(FAT32 or FAT16) and that has

at least 256 MB of memory.

–

“No File” appears on

the display.

• No ﬁle able to be played on this

unit exists.

• Check supported formats. 14, 17

“DRM Stream”

appears on the display.

• This is a ﬁle subject to digital

rights management.

• Cannot play on this unit

because of unsupported

DRM.

15, 17

The sound of the USB

memory device being

connected is not heard.

• The ampliﬁer and speakers are

not connected properly.

• Connect the cables correctly.

(See the instruction manual

for the ampliﬁer.)

–

• The ampliﬁer power is not ON. • Turn the ampliﬁer power ON.

(See the instruction manual

for the ampliﬁer.)

–

• The ampliﬁer’s function or

selector switch is not set to

“CD” or “AUX” or such (to

whatever you have connected

this unit to).

• Switch the ampliﬁer’s

function or selector switch

to “CD” or “AUX” or such

(to whatever you have

connected this unit to).

(See the instruction manual

for the ampliﬁer.)

–

• The ampliﬁer’s volume control

is set at the minimum level.

• Adjust the ampliﬁer volume.

(See the instruction manual

for the ampliﬁer.)

–

Problem Cause Corrective action Page

The sound of the iPod

being connected is not

heard.

• The ampliﬁer and speakers are

not connected correctly.

• Connect the cables correctly.

(See the instruction manual

for the ampliﬁer.)

–

• The ampliﬁer power is not ON. • Turn ON the power to the

ampliﬁer. (See the instruction

manual for the ampliﬁer.)

–

• The ampliﬁer’s function or

selector switch is not set to

“CD” or “AUX” or such (to

whatever you have connected

this unit to).

• Switch the ampliﬁer’s

function or selector switch

to “CD” or “AUX” or such

(to whatever you have

connected this unit to).

(See the instruction manual

for the ampliﬁer.)

–

• The ampliﬁer’s volume control

is set at the minimum level.

• Adjust the ampliﬁer volume.

(See the instruction manual

for the ampliﬁer.)

–

Reading of USB

memory device takes

time.

• When connecting a high-

capacity USB memory device,

it will take time to read

depending on its capacity.

Several minutes may be

required for reading when

using a high-capacity device.

• Wait until reading is

completed.

–

1.SA8004U_ENG_129_1st_1228.indd 25 2011/02/10 8:35:06

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SA8004 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SA8004

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info