Bedienungsanleitung Marantz SR-18EX (Seite 32 von 47) (Englisch)

6546

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

ENGLISH

Erasing the memory assigned to a DIRECT buttons:

All codes and names which were previously memorized for each of the

functions (such as TV, LD, VCR, etc.) in pages can be erased. Press

and hold the CLEAR button ⁄4 and press the < or > button , 2 times.

You will see the “DIR- CLR?” (direct button - clear?) indication in the

LCD window (see Figure 5). If you wish to go ahead and clear all of the

memorized codes for that DIRECT button (8 buttons x 4), press the OK

button

Figure 5

Erasing the memory assigned to each function command set:

All codes and names which were previously memorized for each of

the functions (such as TV, LD, VCR, etc.) can be erased.

Press and hold the CLEAR button ⁄4, and press the function button

that you want to erase 2 times. You will see the “FNC - CLR?” (function

- clear?) indication in the LCD window (see Figure 6).

Figure 6

If you wish to go ahead and clear all of the memorized codes for that

function button, press the OK button within the cursor keys ⁄6. After

clearing the memory contents for that function, the RC-18SR will

restore any factory programmed RC-5 codes for the function, if any,

or will simply be empty.

If you want to cancel the memory clear operation, do not press the

“OK” button, but instead simply touch any other button. When you

clear all the commands associated with a function button, all of the

learned direct function commands (D-1 through D-8, pages 1 through

4) and control buttons, ten keypad, etc are cleared as well.

Complete erasure:

While holding the CLEAR button ⁄4 depressed, press both of the ON

and OFF POWER buttons v simultaneously; “ALL-CLR?” is

displayed on the LCD window (see Figure 7).

Figure 7

If you wish to finalize the complete erasure process, press the OK

button within the cursor keys ⁄6. If you do not wish to proceed with the

complete erasure process, simply press any key other than OK.

Remember, the RC-5 codes as supplied from the factory cannot be

erased from memory, but they can be replaced with different codes as

you wish.

n The all-clear operation takes about 15 seconds after the OK button

is pressed.

n By now, you have learned how to memorize codes from other

brands of components, including changing the various function,

status, and direct function names.

Before continuing on to the more advanced RC-18SR

programming techniques, you may wish to continue “teaching” the

RC-18SR remote control with any or all other commands for other

components in your system. When you feel you’ve transferred as

many different commands from other components into the RC-

18SR as you’d like, and possibly changed some or all of their

names as well, then feel free to proceed to the next section.

ADVANCED PROGRAMMING TECHNIQUES

Macro mode:

The word “macro” is used to describe a series of specific steps

carried out in sequence. For example, a word processing program

can use macros to carry out common repetitive typing tasks. During

the day to day operation of an A/V system, you might often find

yourself pressing the same combination of remote control buttons.

The RC-18SR features the ability to “learn” a sequence of infrared

commands, and “assign” that sequence to a single button, called a

MACRO button n. Then, when you want to achieve a specific result,

you can activate a macro button to begin sending out a series of

commands. For example, suppose you wish to activate your A/V

system, and watch a movie on laser disc. A single macro button

could send out the following commands in this suggested sequence:

n Turn the main amp power on, then turn the TV power on, then

switch the TV to the AUX video input, then change the amp to the

laser disc (LD) input, then turn the LD player power on, then

activate the LD play command, then set the amp surround sound

mode to Dolby Pro Logic.

The above 7 step sequence can be programmed into a single macro

button, and can be used anytime you want to watch a LD movie.

Other macro functions could be used for CD listening, or any other

sequence of steps that you regularly perform while controlling your A/

V system.

Macro commands are available when the RC-18SR is set to USE

mode.

To program a macro, first identify which commands you wish to

memorize, and note if any commands must be in a specific order (for

example, before you can activate an amplifier’s surround mode, the

amp must first be turned on).

1. Press the MACRO x operation mode button with the tip of a

paper clip. Within the LCD window, the MACRO indication

appears, then the LEARN indicator starts blinking (see Figure 8).

Figure 8

If a macro was previously programmed, one or more of the

numeric indicators at the bottom of the LCD window will appear

with a box around it.

2. Press macro button 1 n to begin memorizing the various codes.

In the LCD display window the indicator “M1-00” appears in the

status line b (see Figure 9).

Figure 9

The “M1-00” indication signifies Macro number 1, no steps yet

programmed. As each macro step is programmed, the “00” indicator

will advance by one digit-”01”, “02”, etc. After the first macro step is

programmed, two additional digits (with a decimal in between)

become visible at the end of the status line, showing the timing value

for each step (see Figure 10).

Figure 10

LOW

LEARN

NAME

2 3 4

LOW

USE

LEARN

NAME

2 3 4

LOW

LEARN

NAME

LOW

LEARN

NAME

2 3 4

LOW

LEARN

NAME

2 3 4

LOW

LEARN

NAME

2 3 4

Marantz SR-18EX Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info