Bedienungsanleitung Marantz SR-3001 (Seite 10 von 41) (Englisch)

6548

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

ENGLISH

m Cursor (1, 2, 3, 4) / OK buttons

(when AMP mode is selected)

Use these button when operating the SETUP MAIN

MENU.

, MENU OFF button

(when AMP mode is selected)

This button is used to exit from the SETUP MAIN

MENU.

. Numeric buttons 1 to 9 / Surround

mode buttons

Numeric buttons

These buttons are used to enter ﬁ gures in the se-

lection of a tuner preset station and station name

preset or to set select a CD track number, etc. The

functions of these buttons are dependent on the

function button selected.

Surround mode buttons

(when AMP mode is selected)

These buttons are used to select the surround

mode.

⁄0 P.SCAN (Preset scan) / V(Video)-

OFF button

(when TUNER mode is selected)

This button is used to start preset scan when

SR3001 is selected TUNER mode.

(when AMP mode is selected)

This is used when switching the video signals from

the various monitor outputs to Video-Off mode.

⁄1 0 / A/D button

0 button

This button is used to enter the number “0”

A/D button (when AMP mode is selected)

This is used to switch between the analog and digital

inputs.

⁄2 CONTROL buttons

These buttons are used when operating the CD

player, TAPE deck, etc.

The function of these buttons are dependent on

the function button selected.

For the controllable functions of each input function,

please refer to controllable function table on the page

10.

⁄3 SUB-T (Title) / ATT (attenuator)

button

When the input signal is too high and the voice

distorts even while adjusting the SR3001 VOLUME

control, turn on this function. “ATT” is illuminated

when this function is activated.

The input level is reduced. Attenuator is invalid for

the output signal of “REC OUT”.

Note:

This function is unavailable while the digital input is

selected.

⁄4 INPUT/DISC+ / CH.SEL buttons

This button is used to enter the input level setup

menu.

⁄5 TREBLE UP (3) /DOWN (4)

buttons

These buttons are used to adjust the tone control

of high frequency sound for left and right speaker.

⁄6 BASS UP (3) /DOWN (4) buttons

These buttons are used to adjust the tone control

of low frequency sound for left, right and subwoofer

speaker.

⁄7 MEMO button

Memory enable button for various preset functions.

⁄8 CLEAR button

This button is used to cancel for certain memory or

programming operations.

⁄9 DISPLAY button

Selects the display mode for the front display of the

SR3001.

¤0 NIGHT button

Pressing this button prevents the Dolby Digital

signal from playback at a loud voice. This function

reduces the voice by 1/3 to 1/4 at maximum. Thus,

it eliminates the occurrence of an abruptly loud

voice at night. However, the function is valid only in

the case when the Dolby Digital signal is entered

into OPTICAL or COAXIAL and data to compress

the voice exists in the signal to be played back.

When this button is pressed, the “NIGHT” indicator

is illuminated.

REMOTE CONTROL

OPERATION

FUNCTION AND OPERATION

The provided remote control unit is a universal

remote controller. The POWER button, numeric

buttons and control buttons are used in common

across different input source components.

The input source controlled with the remote control

unit changes when one of the input selector but-

tons is pressed.

ENTER

CH.SEL LIP.SYNC

PTY

SUB-T/ATT

AUDIO

INPUT/DISC+

F.DIRECT

RDS

TUNE/SEARCH

T-MODE

TREBLE

CHANNEL/SKIP

BASS

A/D

P.SCAN/V-OFF

7.1CH IN

STEREO

MCH-ST

MEMO

CLEAR

DISPLAY

NIGHT

CSII EX/ES VIRTUAL

DTS

PURE DIRECT

AUTO

321

654

T.TONE

MENU OFF

SET UP/

OSD

VOL.

MAIN

SLEEP

MUTE

AMPAUX1

TUNER

TAPE

CDR/MD

DVD

POWER

VCR1

DSS/VCR2

SYSTEM REMOTE CONTROLLER

RC5500SR

⁄1

⁄2

⁄5

¤3

¤2

¤1

¤0

⁄9

⁄8

⁄7

⁄6

¤4

⁄4

⁄3

¤5

⁄0

z Transmitting indicator

Lights up during a button is pressed and an infra-

red signal is sending.

x (Main) POWER buttons

(when AMP mode is selected)

Press to switch the power of the SR3001 ON or

OFF after pressing the AMP button.

c Input selector buttons/ FUNCTION

SELECTOR buttons

(AUDIO/VIDEO INPUT)

These buttons are used to select a Audio or Video

source component. Press one of these buttons

once to change the function of the remote control.

Press same button within 2 seconds, the input

function of the SR3001 is changed.

Audio function sources such as CD, TAPE, CDR/MD,

and TUNER may be selected in conjunction with a

Video source.

This feature (Sound Injection) combines a sound

from one source with a picture from another.

Choose the video source ﬁ rst, and then choose a

different audio source to activate this function.

Notes:

• CDR/MD button is set CDR function at initial. To

switch MD function, press and hold down CDR/

MD button and press 2 button.

• To return CDR function, press and hold down CDR/

MD button and press 1 button.

v MAIN VOLUME UP (3) /DOWN (4)

buttons

Main volume control of the SR3001. The front,

surround, center and subwoofer channel volumes

controlled by these buttons simultaneously.

b MUTE button

Muting button of the SR3001. Press this button

decrease the sound temporarily. Press this button

again to return to the previous sound.

When this button is pressed, “MUTE” indicator

lights up.

n MENU button

(when AMP mode is selected)

This button is used to enter the SETUP MAIN

MENU.

Marantz SR-3001 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-3001

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info