Bedienungsanleitung Marantz SR-3001 (Seite 24 von 41) (Englisch)

6548

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

ENGLISH

HT-EQ :

Select to active the HT-EQ with the

1 or 2

cursor

buttons.

The tonal balance of a film soundtrack will be

excessively bright and harsh when played back

over audio equipment in the home. This is because

ﬁ lm soundtracks were designed to be played back

in large movie theater environments.

Activating the HT-EQ feature when watching a ﬁ lm

made for movie theaters corrects this and restores

the correct tonal balance.

The HT-EQ feature can be activated only while in

Dolby Pro Logic Mode, or while decoding Dolby

Digital or DTS encoded material.

LFE LEVEL :

Select the output level of the LFE signal included in

the Dolby Digital signal or the DTS signal.

Select 0 dB, -10 dB or OFF with the

1 or 2

cursor

buttons.

When you select “TO MAIN MENU” by pressing

the 3 or 4 button, you can return the SETUP MAIN

MENU by pressing the ENTER button.

MENU STRUCTURE of SURROUND setup

SURROUND MODE

HT-EQ

LFE

EXITTO MAIN MENU

exit SETUP

4.SURROUND

4. SURROUND

This sub menu is to adjust channel levels for each

surround setting groups. There are three surround

setting groups shown below. Therefore if settings

for a surround mode are changed, settings for all

other surround modes in the same group are also

changed.

Surround setting group

1 : AUTO, DOLBY, DTS, EX/ES, VIRTUAL,

STEREO

2 : Multi-ch stereo

3 : CS

DTS

PURE DIRECT

AUTO

T.TONE

MENU OFF

SET UP/

OSD

VOL.

MAIN

SLEEP

MUTE

ENTER

SURROUND

RECEIVER SR3001

AKER

PURE

SETUP

DIRECT

SIMPLE

AUTO

HT-EQ

ENTER

DISPLAY

MEMORY

CLEAR

T-MODE

EXIT

BAND

MODE

DISP MULTI AUTO TUNED ST V

–

OFF NIGHT PEAK ANALOG

DIGITAL

ATT

SLEEP

SURR

AUTO

DIRECT DISC 6.1 MTX 6.1 EQ

DIGITAL

SURROUND

AAC

PCM

SL S SR

LFE

Select “4. SURROUND” in SETUP MENU with

3 or 4 cursor button.

Press the ENTER button.

To select a desired item, press 3 or 4 cursor

button.

Using the

1 or 2

cursor button to select the mode

or adjust the volume level of each speaker.

When you select “TO MAIN MENU” by pressing

the

3 or 4

button, you can return the SETUP

MENU by pressing the ENTER button.

Or press the 1 or 2 cursor button to select

“EXIT” then press the ENTER button to exit the

SETUP MENU.

SR( SURR-MODE) :

Select the desired surround mode with 1 or 2

cursor button.

• If one of the following modes is selected, all other

modes are also set to the same. AUTO, DOLBY,

DTS, EX/ES, VIRTUAL, STEREO.

When you select “TO MAIN MENU” by pressing

the

3 or 4

button, you can return the SETUP

MENU by pressing the ENTER button.

Or press the 1 or 2 cursor button to select

“EXIT” then press the ENTER button to exit the

SETUP MENU.

BASS MIX

• The bass mix setting is only valid when “LARGE” is

set for the front speakers and “YES” is set for the

subwoofer at stereo playback .

• When the “BOTH” is selected, the low frequency

signal range of “LARGE” are produced

simultaneously from those channels and the

subwoofer channel.

When actual low frequency sound volume is weak

depending on room size, use this function to ﬁ ll low

frequency sound equally in the room.

• When “Mix” is selected, subwoofer output is

determined depending on the speaker sizes for

each channels. If the front speaker size is set to

“Large”, subwoofer output is only the LFE signal

contained in Dolby Digital or DTS processed

signals.

Note:

When Front speaker is set ”SMALL”, then BASS

MIX is set “MIX”. (The display appears “BASS MIX

= ✱✱✱”.)

3. PREFERENCE

DTS

PURE DIRECT

AUTO

T.TONE

MENU OFF

SET UP/

OSD

VOL.

MAIN

SLEEP

MUTE

ENTER

SURROUND

RECEIVER SR3001

AKER

PURE

SETUP

DIRECT

SIMPLE

AUTO

HT-EQ

ENTER

DISPLAY

MEMORY

CLEAR

T-MODE

EXIT

BAND

MODE

DISP MULTI AUTO TUNED ST V

–

OFF NIGHT PEAK ANALOG

DIGITAL

ATT

SLEEP

SURR

AUTO

DIRECT DISC 6.1 MTX 6.1 EQ

DIGITAL

SURROUND

AAC

PCM

SL S SR

LFE

Select “3. PREFERENCE” in SETUP MENU

with 3 or 4 cursor button.

Press the ENTER button.

Press 3 or 4 cursor button to select desired

item.

Press 1 or 2 cursor button to set the mode.

MENU STRUCTURE of PREFERENCE setup

NOMAL

ECONOMY

STBY

TO MAIN MENU EXIT

exit SETUP MENU

3.PREFERENCE

STANDBY MODE:

When this function is set to "ECONOMY", you can reduce

the power consumption when the unit is in the standby mode.

This menu (BASS) will not be displayed, if SUBW is set "NONE".

For L&R is "SMALL" :

The low frequency signal range of front L/R are outputted to a subwoofer

simultaneously with the LFE signal.

For L&R is "LARGE" :

The low frequency signal range of front L/R are not output to subwoofer.

BOTH

MIX

***

BASS

The low frequency signal range of front L/R are outputted to a subwoofer

simultaneously with the LFE signal.

7.1-V

LAST>TV>DVD>…>V-OFF>

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-3001 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-3001

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info