Bedienungsanleitung Marantz SR-3001 (Seite 28 von 41) (Englisch)

6548

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

ENGLISH

VIRTUAL

This mode creates a virtualized surround sound

experience from a two-speaker (front L and R) playback

system playing any multichannel audio source (such as

found on DVDs and digital broadcasts), including Dolby

Digital, Dolby Pro Logic or DTS.

STEREO

This mode bypasses all surround processing.

In stereo program sources, the left and right channels

play normally when PCM-audio or analog stereo is

input.

With Dolby Digital and DTS sources, the 5.1

multichannels are converted to two channel stereo.

96 kHz PCM source material can be played back in

stereo mode.

PURE - DIRECT

In the Pure Direct mode, the tone control circuit and

bass management conﬁ guration are bypassed for

full range frequency response and the purist audio

reproduction.

96 kHz PCM source material can be played back in

this mode.

Notes:

• Internal speaker size is setup to front L/R = LARGE,

Center = LARGE, Surround L/R = LARGE and

Subwoofer = YES automatically. Tone controls and

additional processing are also defeated.

• When you use this mode with certain DVD and CD

players, performing operations such as “Skip” or

“Stop” may momentarily interrupt the output.

CAUTION

NOTE for DTS signal

* Connected DVD-player, laser-disc player or CD-

player needs to support DTS-digital output. You

may not be able to play some DTS source signals

from certain CD players and LD players even if you

connect the player to the SR3001 digitally. This is

because the digital signal has been processed

(such as the output level, sampling frequency,

or frequency response) and the SR3001 cannot

recognize the signal as DTS data.

* Depending on the player used, DTS play may

produce a short noise. This is not a malfunction.

* While signals from DTS-laser disc or CD are

playing in another Surround mode, you cannot

switch to digital input or from digital input to analog

input by INPUT SETUP in SETUP MAIN MENU or

the A/D button.

* The outputs for the VCR 1 OUT, DSS/VCR 2

OUT, TAPE OUT, and CD-R OUT output analog

audio signals. Do not record from CDs or LDs that

support DTS using these outputs. If you do, the

DTS-encoded signal will be recorded as noise.

NOTE for Dolby Digital Surround EX signal

* When playing Dolby Digital Surround EX-encoded

software in 6.1 channels, it is required to set the

EX/ES mode.

* Note that some of Dolby Digital Surround

EX-encoded software does not contain the

identiﬁ cation signal. In this case, set the EX/ES

mode manually.

NOTE for 96kHz PCM audio

AUTO, Pure- DIRECT, and STEREO modes can

be used when playing PCM signals with a sampling

frequency of 96 kHz (such as from DVD-Video

discs that contain 24 bit, 96 kHz audio). If such

signals are input during playback in one of the

other surround modes, output from SR3001 will be

muted.

Certain DVD player models inhibit digital output. For

details, refer to the player’s operation manual.

Some DVD formatted discs feature copy protection.

When using such disc, 96 kHz PCM signal is not

output from the DVD player. For details, refer to the

player's operation manual.

NOTE for HDCD signal

* HDCD is effective only at the time of digital input.

* AUTO, PURE DIRECT, and STEREO modes can

be used when playing HDCD signals (such as

from CD discs that contain HDCD).

* You may not be able to play some HDCD source

signals from certain CD players if you connect the

player to the SR3001 digitally. This is because the

digital signal has been processed (such as the

output level, sampling frequency, or frequency

response) and the SR3001 cannot recognize the

signal as HDCD data.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-3001 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-3001

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info