Bedienungsanleitung Marantz SR-4200 (Seite 8 von 31) (Englisch)

6556

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

ENGLISH

FOREWORD

This section must be read before any connection is made to the mains

supply.

WARNINGS

Do not expose the equipment to rain or moisture.

Do not remove the cover from the equipment.

Do not push anything inside the equipment through the

ventilation holes.

Do not handle the mains lead with wet hands.

EQUIPMENT MAINS WORKING SETTING

Your Marantz product has been prepared to comply with the

household power and safety requirements that exist in your area.

SR4200 can be powered by 230 V AC only.

IMPORTANT: (For UK version)

This apparatus is fitted with an approved moulded 13 Amp plug.

To change a fuse in this type of plug proceed as follows:

1. Remove fuse cover and fuse.

2. Fix new fuse which should be a BS1362 13A, A.S.T.A. or BSI

approved type.

3. Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut

off and an appropriate plug fitted in its place.

If the mains plug contains a fuse, this should have a value of 13A. If a

plug without a fuse is used, the fuse at the distribution board should

not be greater than 5A.

Note:

The severed plug must be destroyed to avoid a possible shock

hazard should it be inserted into a 13A socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured in accordance with the

following code:

BLUE—“NEUTRAL” (“N”)

BROWN—“LIVE” (“L”)

1. The BLUE wire must be connected to the terminal which is marked

with the letter “N” or coloured BLACK.

2. The BROWN wire must be connected to the terminal which is marked

with the letter “L” or coloured RED.

3. Do not connect either wires to the earth terminal in the plug which is

marked by the letter “E” or by the safety earth symbol or coloured

green or green-and-yellow.

Before replacing the plug cover, make certain that the cord grip is

clamped over the sheath of the lead — not simply over the two wires.

Recording and playback of any material may require consent. For

further information refer to the following:

— Copyright Act 1956

— Dramatic and Musical Performers Act 1958

— Performers Protection Acts 1963 and 1972

— any subsequent statutory enactments and orders

ABOUT THIS USER GUIDE

Refer to the figures on page iii of this user guide. The numbers on the

figures correspond to those in the text. All references to the

connections and controls that are printed in BOLD type are as they

appear on the unit.

PRECAUTIONS

The following precautions should be taken when operating the

equipment.

GENERAL PRECAUTIONS

When siting the equipment ensure that:

— the ventilation holes are not covered;

— air is allowed to circulate freely around the equipment

— it is on a vibration free-surface;

— it will not be exposed to interference from an external source;

— it will not be exposed to excessive heat, cold, moisture or dust;

— it will not be exposed to direct sunlight;

— it will not be exposed to electrostatic discharges

Never place heavy objects on the equipment.

If a foreign body or water does enter the equipment, contact your

nearest dealer or service centre.

Do not pull out the plug by pulling on the mains lead, hold the plug.

It is advisable when leaving the house, or during a thunderstorm, to

disconnect the equipment from the mains supply.

PRECAUTIONS IN CONNECTION

• Be sure to unplug the power cable from the AC outlet or turn off the

POWER switch before proceeding with any connection.

• Connect one cable at a time observing the “input” and “output”.

This will avoid any cross connection between channels and signal

inputs and outputs.

• Insert the plugs securely. Incomplete connection may result in

noise.

• Prior to connecting other audio and video equipment to the SR4200,

please read their owner’s manuals.

INSTALLATION

If this unit or another electronic device incorporating a microcomputer

is used at the same time with the tuner or television, picture

disturbance or noise may occur. In such a case, install the unit

according to the following guide points.

• Separate the unit as far as possible from the television.

• Place the antenna wire for the tuner or TV apart from the power

cable and audio and video connection cables of this unit.

• Since the phenomenon is likely to occur when using an indoor

antenna and/or 300-ohm feeder wire, we recommend using an

outdoor antenna and 75-ohm coaxial cable.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-4200 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-4200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info