Bedienungsanleitung Marantz SR-4200 (Seite 17 von 31) (Englisch)

6556

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

ENGLISH

FRONT : Select the type of front speakers with or button.

CENTER : Select the type of center speaker with or button.

SURROUND: Select the type of surround speakers with or

button.

S-WOOFER: Select the subwoofer speaker YES or NO with or

button.

Notes:

This speaker size setup is not effective when the SOURCE-

DIRECT is selected.

When the front speakers are set to SMALL, the setting for

subwoofer is automatically set to YES. This subwoofer setting will

not be shown on the display.

SPK DIST (Speaker distance)

Use this parameter to specify the distance of the speaker’s position

from the listener.

The delay time is automatically set according to these distances.

UNITS:Select speaker with or button, and input each speaker’s

distance with or button.

When the input for each speaker’s distance has been finished,

and press the OK or button.

Notes :

Placement beyond that distance is beyond the range of the

automatic time delay feature.

The delay feature does not function in the SOURCE-DIRECT and

decoding of 96 kHz sources.

CH LEVEL (Channel level)

Desired channels can be selected by pressing or button.

Each channel level will be adjusted by pressing or button.

Only the usable channels which are determined depending on the

SURROUND mode, and SPEAKER SETTING are displayed.

SYSTEM SETUP

1. Press the AMP button c.

2. Press MENU button n display the menu.

Choose a desired item in the contents with or button, and

press the OK or button to select.

Display will change to menu for each item.

Note:

If no operating continues for 1 minute or more, the setup menu is

cancelled and the display will return to original.

SPEAKERS SETUP

The home theater system you already have installed should function

provided that there are left, center and right front speakers, left and

right rear/surround speakers and a subwoofer. For best results we

recommend that all front speakers be of the same type, with identical

or similar driver units. This will deliver smooth pans across the front

sound stage as the action moves from side to side.

Your center channel speaker is very important as over 80 % of the

dialog from a typical motion picture emanates from the center channel.

It should possess similar sonic characteristics to the main speakers.

Rear channel speakers need not be identical to the front channel

speakers, but they should be of high quality.

One of the benefits of both Dolby Digital (AC-3) and DTS is that

surround channels are discrete full range, while they were frequency

limited in earlier “Pro Logic’ type systems.

Bass effects are an important part of home theater. For optimal

enjoyment a subwoofer should be used as it is optimized for low

frequency reproduction. If you have full range front speakers,

however, they may be used in place of a subwoofer with proper setting

of the switches in the menu system.

If possible, mount the surround speakers on the walls to the sides of

the viewing area, 2-3 feet above seated viewers, firing straight across

at each other.

SPK SIZE (Speake size)

This menu enters the information about which type of speakers will be

used for each channel.

In turn, these settings will determine which speakers receive low

frequency information.

For the purpose of establishing proper bass reproduction, use the

LARGE settings if the speaker being used at any position is a

traditional full-range loudspeaker that is capable of reproducing sound

below 100 Hz and you are not using a subwoofer.

Use the SMALL setting for smaller, frequency-limited speakers that are not

able to reproduce sounds below 100Hz and you are using a subwoofer.

Low frequencies will be diverted from the speaker to the subwoofer.

Note that when “small” speakers are used it is advisable to install a

separate subwoofer, especially if you wish to appreciate the full

impact of a good home theater soundtrack.

If the Surround speakers or Center speaker will not be used, set

NONE for each speaker. The NONE setting will send the audio for the

surround channels or Center channel to the front left/right speakers.

SUB WOOFER

LEFT

CENTER

RIGHT

SURROUND-L

SURROUND-R

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-4200 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-4200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info