Bedienungsanleitung Marantz SR-4200 (Seite 20 von 31) (Englisch)

6556

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

ENGLISH

STATION NAME PRESET

The station name preset function allows the name of each preset

channel to be entered using alphanumeric characters. The Station

Name button is valid only in the tuner mode. Before station name

preset operation, store stations with the preset memory operation.

1. Press the MEMORY button !2 on the front panel or MEMO button

⁄6 on the remote for more than 3 seconds.

2. The left most column of the station name indicator flashes,

indicating the character entry ready status.

[Operation (Using the SR4200)]

3. When you press the TUNING/PRESET or buttons !3 is

turned, alphabetic and numeric characters will be displayed in the

following order:

A → B → C ...Z → 1 → 2 → 3..... 0 → – → + → / → (Blank) → A

UP →

← DOWN

4. After selecting the first character to be entered, press the

MEMORY button !2. The entry in this column is fixed and the next

column starts to flash. Fill the next column and press the

MEMORY button !2 for more than 3 seconds to confirm the entry.

[Operation (Using the remote control unit)]

First, press the TUNER button c on the remote control unit.

(This operation is not necessary if the remote control unit has

already been operated in the TUNER mode.)

3. Enter the character using the ten keypad .. For example, to

enter “A”:

1) Press the “1” button. “A” appears on the display column.

2) Every time the 1 button is pressed, the displayed character

changes in the order: A → B → C → 1 → A...

Pressing buttons other than the “1” button cause different

characters to be displayed in a similar way, so that other

alphanumeric characters can be entered. To enter a blank or

space, press the “9” button.

4. When the desired character is displayed, press the MEMO button

⁄6 to confirm the entry in this column and move to the next

column. After having filled all of the 8 columns, press the MEMO

button ⁄6, for more than 3 seconds to confirm the entry.

FREQUENCY DIRECT CALL (Using the remote control

unit)

1. Press the F.DIRECT button ⁄2 in the TUNER MODE on the

remote controller.

2. Front display will show “F-DIR IN”.

3. Input your desired frequency with ten key pad button on the

remote.

RDS OPERATION

Now in use in many countries, RDS (Radio Data System) is a

description of the station’s programming hidden space in the FM

signal.

Your new receiver is equipped with RDS to assist in the selection of

FM stations using station and network names, rather than broadcast

frequencies. Additional RDS functions include the ability to search for

programme types.

RADIO TEXT

Some RDS stations broadcast RADIO TEXT, which is additional

information on the station and programme being broadcast.

RADIO TEXT information appears as ‘running’ text in the display.

RADIO TEXT is transmitted character-by- character by the radio

station. As a result of that it may take some time until the entire text

has been completely received.

RDS DISPLAY

When a receiver is tuned to an FM station that is transmitting RDS

data, the Front Panel Information Display will automatically show the

station name or RDS TEXT in place of the typical display of the

station’s broadcast frequency.

To change the display, press the RDS button ⁄2 on the remote

controller.

PROGRAMME TYPE (PTY) DISPLAY

The RDS system categorizes programmes according to their genre

into different programme type (PTY) groups. To display the

programme type information of the current station, press the PTY

button ⁄2 in the TUNER MODE on the remote controller.

PTY AUTO SEARCH

Your receiver is equipped to automatically search for stations

transmitting any of 29 different programme types. To search for a

PTY, follow these procedures:

1. Press the PTY button ⁄2 in the TUNER MODE on the remote

controller. The current station’s PTY will be displayed, or the

currently selected PTY group will be displayed in blinking if no

station or RDS data is present.

2. To change to a new PTY type, press the CHANNEL button ⁄2

until the desired PTY is shown in the display.

3. Once the desired PTY group or type has been selected, press the

PTY button ⁄2 while the display blink (approx. 5 seconds). The

PTY Auto search will start, and the tuner will pause at each station

broadcasting RDS PTY information corresponding to the selected

choice.

4. To advance to the next RDS station with the desired PTY, press

the PTY button ⁄2 again within 5 seconds.

RT (

RADIO TEXT

)

PS (

Program Service Name

) Frequency

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-4200 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-4200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info