Bedienungsanleitung Marantz SR-4300 (Seite 26 von 44) (Englisch)

6558

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

ENGLISH

SPEAKERS LEVEL

Here you will set the volume for each speaker so that they are all

heard by the listener at the same level.

Note:

• The speaker level settings is not available in 6.1channel input

mode and S-Direct mode.

TEST MODE : Selects “MANU (manual)” or “AUTO” for generating

mode of test tone or cursor button.

If you select “AUTO” by pressing the

button, the test tone will be cycled

through in a circular pattern which is L (Left) →C (Center) →R (Right)

→SR (Surround Right) →SB (Surround Back) →SL (Surround Left)

→SW (Subwoofer →L →.. increments of 2 seconds for each channel.

Using the

and cursor buttons, adjust the volume level of the noise

from the speaker so that it is the same level for all speaker.

When you select “TO MAIN MENU” by pressing the OK button, you

can return the SETUP MAIN MENU by pressing the OK button . Or

press the or cursor button to select “EXIT” then press the OK

button to exit the SETUP MENU.

Or press the or cursor button to select “RETURN” then press the

OK button to return the previous “SPEAKER DISTANCE” setup.

If you select “MANU”, adjust the output level of each speaker as

follow.

When you select “MANUAL” in T.MODE menu by pressing the

or button, this unit will emit a pink noise from the front left

speaker. At this time, adjust the desired level of the master

volume. Remember the level of this noise and then press the

button. This unit will emit the pink noise from the center speaker.

Using the and cursor buttons, adjust the volume level of the

noise from the center speaker so that it is the same level as the

front left speaker (Note that this can be adjusted to any level

between –10 and +10 dB in 1dB intervals).

Press the cursor button again. This unit will now emit the pink

noise from the front right speaker.

Repeat steps 2 and 3 above for the front right and other speakers

until all speakers are adjusted to the same volume level.

When you select “TO MAIN MENU” by pressing the OK button,

you can return the SETUP MAIN MENU by pressing the OK

button . Or press the or cursor button to select “EXIT” then

press the OK button to exit the SETUP MENU.

Or press the or button to select “RETURN” then press the OK

button to return the previous “SPEAKER DISTANCE” setup.

Notes:

• Speakers that you selected “None” for in the Speaker Size Setup

menu will not appear.

• The setup level for each channel is memorized for reproduction

in all surround mode.

• To adjust the speaker levels for 6.1-channel input sources, you

will need to use the 6.1CH Level Input setup menu.

OFF

BASS

897

VOLUME

MUTE

1CH

-IN

2CH

A/D

SETUP/T.TONE

S-DIRECT

F.DIRECT

1. 5.

2. 5.

1. 3. 5.

+10dB

+9dB

-9dB

Minimum

Maximum

1 dB interval

Reference

1 dB interval

-10dB

(SW -15 dB)

button

0dB

MENU STRUCTURE of Speaker Level setup

MANU AUTO

L C

SL SR

EXITRETURNTO MAIN MENU

Speaker

(Auto)

Speaker

Distance setup

MAIN

exit SETUP

Test Tone mode

Speaker

Level setup

Speaker

Distance

setup

Direct selec

by remote

control

Listening

Positiom

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-4300 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-4300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info