8
ENGLISH
REAR PANEL
b MONITOR OUT
There are 2 monitor outputs and each one includes both composite
video and S-video configurations.
n Subwoofer Output
Connect this jack to the line level input of a powered subwoofer. If an
external subwoofer amplifier is used, connect this jack to the
subwoofer amplifier input. If you are using two subwoofers, either
powered or with a 2 channel subwoofer amplifier, connect a “Y”
connector to the subwoofer output jack and run one cable from it to
each subwoofer amplifier.
m Preamp Outputs (L, R, SL, SR, SB, C)
Jacks for L (front left), R (front right), C (Center), SL (surround left), SR
(surround right) and SB (surround back).
Use these jacks for connection to some external power amplifiers.
, 6.1 CHANNEL INPUT
By connecting a DVD Audio player, SACD multi channel player, or
other component that has a multi channel port, you can playback the
audio with 5.1 channel or 6.1 channel output.
. Speaker outputs terminals
Six terminals are provided for the front left, front right, front center,
surround left, surround right and surround back speakers.
⁄0 REMOTE CONT. IN/OUT terminals
Connect to a Marantz component equipped with remote control (RC-
5) terminals.
z FM antenna terminal (75 ohms)
Connect an external FM antenna with a coaxial cable, or a cable
network FM source.
AM antenna and ground terminals
Connect the supplied AM loop antenna. Use the terminals marked
“AM” and “GND”. The supplied AM loop antenna will provide good
AM reception in most areas. Position the loop antenna until you hear
the best
x AUDIO IN/OUT (CD, TAPE, CDR/MD, TV,
DVD, VCR1, DSS/VCR2)
These are the analog audio inputs and outputs. There are 7 audio
inputs (4 of which are linked to video inputs) and 4 audio outputs (2 of
which are linked to video outputs). The audio jacks are nominally
labeled for cassette tape decks, compact disc players,DVD players
and etc.... The audio inputs and outputs require RCA-type connectors.
c VIDEO IN/OUT (TV, DVD, VCR1 and
DSS/VCR2)
There are 4 composite video inputs and 2 composite video outputs.
Connect VCR, DVD player, and other video components to the video
input.
The output channels can be used to be connected to video recorder
for making recordings.
v S-VIDEO IN/OUT
There are 2 S-VIDEO inputs and one S-VIDEO output.
Connect VCR, DVD player, and other video components to the S-
VIDEO input.
The output channel can be used to be connected to video recorder for
making recordings.
S-VIDEO sources can be viewed through the S-VIDEO output, and
composite sources can only be viewed through the composite output.
DIGITAL
