Bedienungsanleitung Marantz SR-4600 (Seite 24 von 41) (Englisch)

6566

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

ENGLISH

HT-EQ :

Select to active the HT-EQ with the or cursor

buttons.

The tonal balance of a film soundtrack will be

excessively bright and harsh when played back

over audio equipment in the home. This is

because film soundtracks were designed to be

played back in large movie theater environments.

Activating the HT-EQ feature when watching a

film made for movie theaters corrects this and

restores the correct tonal balance.

The HT-EQ feature is available except in the

following modes.

• 7.1 CH INPUT

• PURE-DIRECT

• When VIRTUAL is set for the surround mode

LFE LEVEL :

Select the output level of the LFE signal included

in the Dolby Digital signal or the DTS signal.

Select 0 dB, -10 dB or OFF with the or cursor

buttons.

When you select “TO MAIN MENU” by pressing

the or button, you can return the SETUP MAIN

MENU by pressing the ENTER button.

4. SURROUND

This sub menu is to adjust channel levels for each

surround setting groups. There are three surround

setting groups shown below. Therefore if settings

for a surround mode are changed, settings for all

other surround modes in the same group are also

changed.

Surround setting group

1 : AUTO, DOLBY, DTS, EX/ES, VIRTUAL,

STEREO

2 : Multi-ch stereo

3 : CS II

Select “4. SURROUND” in SETUP MENU

with or cursor button.

Press the ENTER button.

To select a desired item, press or cursor

button.

Using the or cursor button to select the mode

or adjust the volume level of each speaker.

When you select “TO MAIN MENU” by pressing

the or button, you can return the SETUP

MENU by pressing the ENTER button.

Or press the or cursor button to select

“EXIT” then press the ENTER button to exit

the SETUP MENU.

SR(SURR-MODE) :

Select the desired surround mode with

cursor button.

• If one of the following modes is selected, all other

modes are also set to the same. AUTO, DOLBY,

DTS, EX/ES, VIRTUAL, STEREO.

When you select “TO MAIN MENU” by pressing

the or button, you can return the SETUP

MENU by pressing the ENTER button.

Or press the or cursor button to select

“EXIT” then press the ENTER button to exit

the SETUP MENU.

BASS MIX

• The BASS MIX setting is only valid when

“LARGE” is set for the front speakers and “YES”

is set for the subwoofer at stereo playback .

• When the “BOTH” is selected, the low

frequency signal range of “LARGE” are

produced simultaneously from those channels

and the subwoofer channel.

When actual low frequency sound volume is

weak depending on room size, use this function

to fill low frequency sound equally in the room.

• When “MIX” is selected, subwoofer output is

determined depending on the speaker sizes for

each channels. If the front speaker size is set to

“Large”, subwoofer output is only the LFE signal

contained in Dolby Digital or DTS processed

signals.

Note:

• When Front speaker is set ”SMALL”, then BASS

MIX is set “MIX”. (The display appears “BASS

MIX = ✱✱✱”.)

SURROUND MODE

HT-EQ

LFE

EXITTO MAIN MENU

exit SETUP

4.SURROUND

MENU STRUCTURE of SURROUND setup

3. PREFERENCE

Select “3. PREFERENCE” in SETUP MENU

with or cursor button.

Press the ENTER button.

Press or cursor button to select desired

item.

Press or cursor button to set the mode.

DTS

PURE DIRECT

AUTO

T.TONE

MENU OFF

SET UP/

OSD

VOL.

MAIN

SLEEP

MUTE

ENTER

3. 4.

2. 4.

1. 4.

DTS

PURE DIRECT

AUTO

T.TONE

MENU OFF

SET UP/

OSD

VOL.

MAIN

SLEEP

MUTE

ENTER

4. 5.

2. 5.

1. 3. 5.

SURROUND

ND RECEIVER SR4600

NES

EAKER

PURE

SETUP

DIRECT

SIMPLE

AUTO

HT-EQ

ENTER

DISPLAY

MEMORY

CLEAR

T-MODE

EXIT

BAND

MODE

DISP MULTI AU TO TUNED ST V

–

OFF NIGHT PEAK ANALOG

DIGITAL

ATT

SLEEP

SURR

AUTO

DIRECT DISC 6.1 MTX 6.1 EQ

DIGITAL

SURROUND

AAC

PCM

SL S SR

LFE

4. 5.

2. 5.

1. 3. 5.

MENU STRUCTURE of SURROUND setup

MENU STRUCTURE of PREFERENCE setup

NOMAL

ECONOMY

STBY

TO MAIN MENU EXIT

exit SETUP MENU

3.PREFERENCE

STANDBY MODE:

When this function is set to "ECONOMY",

you can reduce the power consumption when

the unit is in the standby mode.

This menu (BASS) will not be displayed, if SUBW is set "NONE".

For L&R is "SMALL" :

The low frequency signal range of front L/R are outputted to a subwoofer

simultaneously with the LFE signal.

For L&R is "LARGE" :

The low frequency signal range of front L/R are not output to subwoofer.

BOTH

MIX

***

BASS

The low frequency signal range of front L/R are outputted to a subwoofer

simultaneously with the LFE signal.

7.1-V

LAST>TV>DVD>…>V-OFF>

MENU STRUCTURE of PREFERENCE setup

SURROUND

ND RECEIVER SR4600

NES

EAKER

PURE

SETUP

DIRECT

SIMPLE

AUTO

HT-EQ

ENTER

DISPLAY

MEMORY

CLEAR

T-MODE

EXIT

BAND

MODE

DISP MULTI AU TO TUNED ST V

–

OFF NIGHT PEAK ANALOG

DIGITAL

ATT

SLEEP

SURR

AUTO

DIRECT DISC 6.1 MTX 6.1 EQ

DIGITAL

SURROUND

AAC

PCM

SL S SR

LFE

3. 4.

2. 4.

1. 4

SR4600U DFU_01_ENG 2_2 05.5.20, 5:41 PMPage 21 Adobe PageMaker 6.5J/PPC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-4600 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info