Bedienungsanleitung Marantz SR-5001 (Seite 11 von 56) (Englisch, Holländisch)

6568

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ENGLISH

!0 Subwoofer Output

Connect this jack to the line level input of a powered

subwoofer. If an external subwoofer ampliﬁ er is used,

connect this jack to the subwoofer ampliﬁ er input. If

you are using two subwoofers, either powered or

with a 2 channel subwoofer ampliﬁ er, connect a “Y”

connector to the subwoofer output jack and run one

cable from it to each subwoofer ampliﬁ er.

!1 7.1 CHANNEL or AUX2 INPUT

By connecting a DVD Audio player, Super Audio CD

multichannel player, or other components that has a

multichannel port, you can playback the audio with

5.1 channel or 7.1 channel outputs.

!2 Multiroom Outputs (SR5001 only)

These are the audio output jacks for the Multi zone

(Multi room).

Connect these jacks to optional audio power

amplifiers to listen the source selected by the

multiroom system in a remote room.

!3 REMOTE CONT. IN/OUT terminals

Connect to a Marantz component equipped with

remote control (RC-5) terminals.

!4 AUDIO IN/OUT (CD, TAPE, CD-R,

TV, DVD, VCR1, DSS/VCR2)

These are the analog audio inputs and outputs. There

are 7 audio inputs (4 of which are linked to video

inputs) and 4 audio outputs (2 of which are linked to

video outputs). The audio jacks are nominally labeled

for cassette tape decks, compact disc players, DVD

players and etc.... The audio inputs and outputs

require RCA-type connectors.

!5 DIGITAL INPUT

(SR4001 : Dig.1 - 4, SR5001 : Dig.1-5)

/ OUTPUT (coaxial, optical)

These are the digital audio inputs and outputs. There

are 2 digital inputs with coaxial jacks, 2 with optical

jacks.

The inputs accept digital audio signals from a CD,

DVD, or other digital source component.

For digital output, there is 1 coaxial output and 1

optical output.

The digital outputs can be connected to MD recorders,

CD recorders, or other similar components.

!6 HDMI INPUT/OUTPUT

This unit has 2 HDMI inputs and 1 HDMI output. The

input function can be selected from the

OSD menu

system

. (See page 26)

!7 DC TRIGGER output terminal

(SR5001 only)

Connect a device that needs to be triggered by DC

under certain conditions (screen, power strip, etc…)

Use the system OSD setup menu to determine the

conditions by which these jack will be active.

Note:

This output voltage is for (status) control only, It is not

sufﬁ cient for drive capability.

!8 FLASHER IN

(Flasher input terminal)

These terminals are to control the unit from each

zone. Connect the control signal from a Keypad,

etc.

SPEAKER C SELECTOR SWITCH

(SR5001 only)

The terminals can be used to connect a third set of

speakers by setting the SPEAKER C selector switch

to ON. For connection and use, see page 23.

XM antenna terminal (SR5001 only)

Plug the XM Connect-and-play antenna or Passport

system into XM terminal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-5001 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info