Bedienungsanleitung Marantz SR-5300 (Seite 23 von 40) (Englisch)

6572

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

ENGLISH

SPEAKER DISTANCE (TIME ALIGNMENT)

Use this parameter to specify the distance of each speaker’s position

from the listening position. The delay time is automatically calculated

according to these distances.

Begin by determining the ideal or most commonly used seating

position in the room.

This is important for the timing of the acoustics to create the proper

sound space that the SR5300 and today’s sound systems are able to

produce.

Note that the speakers that you selected “NONE” for in the Speaker

Config sub-menu will not appear here.

(There are several useful books and special DVD and LD’s available

to guide you through proper home theater configuration. If you are

unsure, have your Marantz dealer perform the installation for you.

They are trained professionals familiar with even the most

sophisticated custom installations.)

To select the each speaker , press or cursor button.

To set the distance for each speaker , press the or cursor

buttons.

If you finish these setup, move cursor to “NEXT” with or cursor

button and then press OK button to go to next page.

FRONT L/R : Set the distance from the front left/right speaker to your

normal listening position between 1 and 30 feet in 1.0

foot interval (0.3 to 9 meters in 0.3-meter intervals).

CENTER : Set the distance from the center speaker to your normal

listening position between 1 and 30 feet in 1.0 foot

interval

(0.3 to 9 meters in 0.3-meter intervals).

SURR. L : Set the distance from the surround left speaker to your

normal listening position between 1 and 30 feet in 1.0

foot interval (0.3 to 9 meters in 0.3-meter intervals).

SURR. R : Set the distance from the surround right speaker to your

normal listening position between 1 and 30 feet in 1.0

foot interval (0.3 to 9 meters in 0.3-meter intervals).

SUB W : Set the distance from the subwoofer to your normal

listening position between 1 and 30 feet in 1.0-foot

intervals

(0.3 to 9 meters in 0.3-meter intervals).

SURR. C : Set the distance from a surround center speaker to your

normal listening position between 1 and 30 feet in 1.0-

foot intervals (0.3 to 9 meters in 0.3-meter intervals).

Notes

• Speakers that you selected “NONE” for in the Speaker Size

menu will not appear.

SPEAKERS LEVEL

Here you will set the volume for each speaker so that they are all

heard by the listener at the same level.

Note:

• The speaker level settings is not available in 6.1channel input

mode and S-Direct mode.

TEST MODE : Selects “MANUAL” or “AUTO” for generating mode of

test tone or cursor button.

If you select “AUTO” , the test tone will be cycled through in a circular

pattern which is Left → Center → Right → Surround Right → Surround

Center → Surround Left → Subwoofer → Left →.. increments of 2

seconds for each channel.

Using the and cursor buttons, adjust the volume level of the noise

from the speaker so that it is the same level for all speaker.

If you select “MANUAL”, adjust the output level of each speaker as

follows.

When you move cursor to FRONT L by pressing cursor button,

the SR5300 will emit a pink noise from the front left speaker.

At this time, the master volume automatically increases to the

reference level (0 dB).

Remember the level of this noise and then press the cursor

button.

(Note that this can be adjusted to any level between -10 and +10

dB in 1 dB intervals.)

The SR5300 will now emit the pink noise from the center speaker.

Using the and cursor buttons, adjust the volume level of the

noise from the center speaker so that it is the same level as the

front left speaker.

Press the cursor button again. The SR5300 will now emit the

pink noise from the front right speaker.

Repeat steps 2 and 3 above for the front right and other speakers

until all speakers are adjusted to the same volume level.

If you finish these setup, press OK button, the cursor will move to

“MAIN” and then press OK button to go to SETUP MAIN MENU.

Notes:

• Speakers that you selected “NONE” for in the Speaker Size

menu will not appear.

• The setup level for each channel is memorized for reproduction

in all surround mode.

• To adjust the speaker levels for 6.1-channel input sources, you

will need to use the 6.1CH-INPUT sub menu. (See page 19).

• In order to correctly set the output levels, use a hand-held Sound

Pressure Level meter (SPL), set to C-Weighting and Slow

averaging. A Radio Shack

SPL meter (catalogue number 330

- 2055) works well. Using the internal channel noise

generators, set each channel so that you read 75 dB SPL from

each channel when seated at the listening position.

2 - 2 SPEAKERS D I STANCE

FRONT L / R : 1 0 f t 3 . 0 m

CENTER : 1 0 f t 3 . 0 m

SURR . L : 1 0 f t 3 . 0 m

SURR . R : 1 0 f t 3 . 0 m

SUB W : 1 0 f t 3 . 0 m

SURR . C : 1 0 f t 3 . 0 m

MA I N RTN NEX T EX I T

2 - 3 SPEAKERS LEVEL

TEST MODE : MANUAL

FRONT L : 0 dB

CENTER : 0 dB

FRONT R : 0 dB

SURR . R : 0 dB

SURR . C : 0 dB

SURR . L : 0 dB

SUB W : 0 dB

MA I N R T N E X I T

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-5300 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info