Bedienungsanleitung Marantz SR-5300 (Seite 27 von 40) (Englisch)

6572

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

ENGLISH

STATION NAME PRESET (On PRESET display mode)

The station name preset function allows the name of each preset

channel to be entered using alphanumeric characters. The Station

Name button is valid only in the tuner mode. Before station name

preset operation, store stations with the preset memory operation.

Press the MEMORY button !3 on the front panel or MEMO button

⁄6 on the remote for more than 3 seconds.

The left most column of the station name indicator flashes,

indicating the character entry ready status.

[Operation (Using the SR5300)]

When you press the TUNING/PRESET or buttons !4 is

turned, alphabetic and numeric characters will be displayed in the

following order:

A → B → C ...Z → 1 → 2 → 3..... 0 → – → + → / → (Blank) → A

UP →

← DOWN

After selecting the first character to be entered, press the

MEMORY button !3. The entry in this column is fixed and the next

column starts to flash. Fill the next column and press the

MEMORY button !3 for more than 1 second to confirm the entry.

[Operation (Using the remote control unit)]

First, press the TUNER button c on the remote control unit.

(This operation is not necessary if the remote control unit has

already been operated in the TUNER mode.)

Enter the character using the ten keypad .. For example, to

enter “A”:

1) Press the “1” button. “A” appears on the display column.

2) Every time the 1 button is pressed, the displayed character

changes in the order: A → B → C → 1 → A...

Pressing buttons other than the “1” button cause different

characters to be displayed in a similar way, so that other

alphanumeric characters can be entered. To enter a blank or

space, press the “9” button.

When the desired character is displayed, press the MEMO button

⁄6 to confirm the entry in this column and move to the next

column. After having filled all of the 8 columns, press the MEMO

button ⁄6, for more than 1 second to confirm the entry.

PLAYBACK OPERATION

NORMAL PLAYBACK

Press the POWER button q / x.

Press the FUNCTION SELECTOR button t on the front panel or

press the FUNCTION button c on the remote unit to select an

input source.

Turn the SURROUND MODE SELECTOR knob e on the front

panel or Surround mode buttons . in the AMP MODE on the

remote unit to select the desired surround mode.

Adjust the volume level using the VOLUME knob r on the front

panel or press the MAIN VOL. button v on the remote. If

necessary, adjust the tone, press the TREBLE , TREBLE ⁄4

and BASS , BASS ⁄5 on the remote unit.

Note:

• In case of remote control operation, press one of the function

buttons twice within 2 seconds to select the function.

LISTENING TO A DIFFERENT AUDIO SOURCE WHILE

WATCHING A VIDEO SOURCE (Using the remote control unit)

Select one of the following video sources

TV, DVD, VCR1, DSS/VCR2 or AUX.

Next, select one of the following audio sources

FM, AM, CD, TAPE, or CDR/MD.

TV AUTO ON/OFF FUNCTION

This function allows the component connected to the TV IN jack to

control the power (ON/OFF) to the SR5300.

AUTO POWER ON

Be sure TV auto mode is enable. (Refer page 18 : PREFERENCE)

Connect your TV TUNER (etc) to the TV IN terminal.

Be sure to connect the video input.

Turn OFF the power to the TV TUNER and the SR5300 will be in

standby mode.

Turn ON the TV TUNER and tune in a receivable station.

When the station is received, the SR5300 turns ON and TV is

selected automatically.

AUTO POWER OFF

In the above situation, turn the TV TUNER OFF or select a

channel that does not contain any broadcast.

The SR5300 switches to STANDBY after approximately 5

minutes.

Note:

• AUTO POWER OFF is canceled if the FUNCTION

SELECTOR button t is set to a source other than TV. The

function reactivates when TV is selected again.

Caution:

• Some TV broadcasts may cause the TV AUTO FUNCTION to

turn on.

• S-Video termianl does not support “TV AUTO ON/OFF”

function.

SETTING THE SLEEP TIMER

Set the sleep timer while the power is turned on.

Turn the power ON and press the SLEEP button o / ¤3.

Press the SLEEP button o / ¤3 the number of times to set the

desired sleep time in minutes.

Each press of the SLEEP button o / ¤3 or changes the display in

the following order:

The unit will shut off in the number of minutes indicated.

* While the sleep timer is activated, the remaining time can be

displayed for approximately 2 seconds by pressing the SLEEP

button o / ¤3.

* To cancel the Sleep timer, press the SLEEP button o / ¤3 until the

display shows to “SLEEP OFF” and the SLEEP indicator disappear.

10 20 30

(OFF) 90 80

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-5300 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info