Bedienungsanleitung Marantz SR-5400 (Seite 10 von 36) (Englisch)

6574

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

Numeric buttons 1 to 9 / Surround mode

buttons

Numeric buttons

These buttons are used to enter figures in the selec-

tion of a tuner preset station and station name pre-

set or to set select a CD track number, etc. The func-

tions of these buttons are dependent on the function

button selected.

Surround mode buttons (when AMP mode is

selected)

These buttons are used to select the surround mode.

⁄0

P.SCAN (preset scan) button

(when TUNER mode is selected)

This button is used to start preset scan when

SR5400 is selected TUNER mode.

⁄1

0 / A/D button

0 button

This button is used to enter the number “0”

A/D button (when AMP mode is selected)

This is used to switch between the analog and

digital inputs.

⁄2

CONTROL buttons

These buttons are used when operating the CD

player, TAPE deck, etc.

The function of these buttons are dependent on the

function button selected.

For the controllable functions of each input function,

please refer to contrable function table on the page 10.

⁄3

ATT (attenuator) button

When the input signal is too high and the voice dis-

torts even while adjusting the SR5400 VOLUME

control, turn on this function. “ATT” is illuminated

when this function is activated.

The input level is reduced. Attenuator is invalid for

the output signal of “REC OUT”.

Note:

•

This function is unavailable while the digital input

is selected.

⁄4

TREBLE UP ( ) /DOWN ( ) buttons

These buttons are used to adjust the tone control of

high frequency sound for left and right speaker.

⁄5

BASS UP ( ) /DOWN ( ) buttons

These buttons are used to adjust the tone control of

low frequency sound for left, right and subwoofer

speaker.

⁄6

MEMO button

Memory enable button for various preset functions.

⁄7

CLEAR button

This button is used to cancel for certain memory or

programming operations.

⁄8

DISPLAY button

Selects the display mode for the front display of the

SR5400.

⁄9

NIGHT button

Pressing this button prevents the Dolby Digital sig-

nal from playback at a loud voice. This function re-

duces the voice by 1/3 to 1/4 at maximum. Thus, it

eliminates the occurrence of an abruptly loud voice

at night. However, the function is valid only in the

case when the Dolby Digital signal is entered into

OPTICAL or COAXIAL and data to compress the

voice exists in the signal to be played back.

When this button is pressed, the “NIGHT” indicator

is illuminated.

¤0

S- (Source) DIRECT button

When this button is pressed, the tone control

circuit is bypassed.

¤1

SETUP / T.TONE button

(when AMP mode is selected)

Used to enter the test tone menu.

¤2

OSD button

(when AMP mode is selected)

When this button is pressed, the current setting is

displayed on the TV monitor.

¤3

SLEEP (sleep timer) button

This button is used for setting the sleep timer. It can

be operated the same way as the button on the unit.

¤4

TV VOLUME UP ( ) /DOWN ( ) buttons

These buttons increase or decrease TV’s volume.

REMOTE CONTROL

OPERATION

FUNCTION AND OPERATION

The provided remote control unit is a universal re-

mote controller. The POWER button, numeric but-

tons and control buttons are used in common across

different input source components.

The input source controlled with the remote control

unit changes when one of the input selector but-

tons is pressed.

Transmitting indicator

Lights up during a button is pressed and an infrared

signal is sending.

(Main) POWER buttons

(when AMP mode is selected)

Press to switch the power of the SR5400 ON or OFF

after pressing the AMP button.

Input selector buttons/ FUNCTION

SELECTOR buttons (AUDIO/VIDEO INPUT)

These buttons are used to select a Audio or Video

source component. Press one of these buttons

once to change the function of the remote control.

Press same button within 2 seconds, the input func-

tion of the SR5400 is changed.

Note:

• CDR/MD button is set CDR function at initial. To

switch MD function, press and hold down CDR/

MD button and press 2 button.

• To return CDR function, press and hold down

CDR/MD button and press 1 button.

MAIN VOLUME UP ( ) /DOWN ( ) buttons

Main volume control of the SR5400. The front, sur-

round, center and subwoofer channel volumes con-

trolled by these buttons simultaneously.

MUTE button

Muting button of the SR5400. Press this button de-

crease the sound temporarily . Press this button

again to return to the previous sound.

When this button is pressed, “MUTE” indicator lights

up.

MENU button

(when AMP mode is selected)

This button is used to enter the SETUP MAIN MENU.

Cursor buttons ( , , , , OK)

Used to operate on-screen and other displays used

by receivers and other components.

See page 16.

MENU OFF button

(when AMP mode is selected)

This button is used to exit from the SETUP MAIN

MENU.

DISC/DECK

PTY

ATT.

–/B /VCR+/A /ANT

F.DIRECT

DISP./RDS

TUNE/SEARCH

MODE

TREBLE

CHANNEL/SKIP

BASS

A/D

P.SCAN

6.1CH IN

STEREO

M-CH ST

MEMO

CLEAR

DISPLAY

NIGHT

CSII EX/ES DSP

DTS

S-DIRECT

AUTO

321

654

T.TONE

MENU OFF

SETUP/

OSD

VOL.

MAIN

SLEEP

MUTE

AMPAUX

TUNER

TAPE

CDR/MD

DVD

POWER

VCR1

DSS/VCR2

SYSTEM REMOTE CONTROLLER

RC5400SR

¤4

⁄0

⁄1

⁄2

⁄3

⁄4

¤2

¤1

¤0

⁄9

⁄8

⁄7

⁄6

⁄5

¤3

Marantz SR-5400 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info