Bedienungsanleitung Marantz SR-5400 (Seite 28 von 36) (Englisch)

6574

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

6.1 CH INPUT.

The SR5400 is equipped for future expansion

through the use of Multi channel SACD

multichannel player or DVD-Audio player.

When this is selected, the input signals connected

to the L(front left), R (front right), CENTER, SL

(surround left), SR (surround right) and SB

(surround back) channels of the 6.1 CH. In jacks

are output directly to the front (left and right),

center, surround (left and right) and surround back

speaker systems as well as the pre-out jacks

without passing through the surround circuitry.

In addition, the signal input to the SW (subwoofer)

jack is output to the PRE OUT SW (subwoofer)

jack.

When 6.1 CH. INPUT is selected, the last video

input used remains routed to the Monitor Outputs.

This permits simultaneous viewing with video

sources.

Select a desired Video source to decide the

routed video signal to the Monitor Outputs .

Press the 6.1 CH INPUT button on the front

panel or press 6.1 CH IN on the remote to

switch the 6.1 channel input.

If it is necessary to adjust the output level of

each channel, use “6.1 Ch. INPUT LEVEL” in

the OSD menu system as desired.

Adjust the speaker output levels so that you

can hear the same sound level from each

speaker at the listening position. For the front

left, front right, center, surround left, surround

right and surround back speakers, the output

levels can be adjusted between –10 to +10 dB.

The subwoofer can be adjusted between –15

and +10 dB.

These adjustments result will be stored to 6.1

Ch. INPUT memory. (see to page 19)

Adjust the main volume with the MAIN VOLUME

knob or the VOL buttons on the remote.

RECORDING AN ANALOG SOURCE

In normal operation, the audio or video source

selected for listening through the SR5400 is sent to

the record outputs.

This means that any program you are watching or

listening to may be recorded simply by placing

machines connected to the outputs for TAPE OUT,

CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT

in the record mode.

To record the input source signal you are currently

watching or listening to

Select the input source to record by pressing

the corresponding input selector button.

The input source is now selected and you may

watch or listen to it as desired.

The currently selected input source signal is

output to the TAPE OUT , CD-R/MD OUT,

VCR1 OUT, and DSS/VCR2 OUT outputs for

recording.

Start recording to the recording component as

desired.

Recording the video from one source and the

audio from another

You can add the sound from one source to the

video of another source to make your own video

recordings.

Below is an example of recording the sound from a

compact disc player connected to CD IN and the

video from a video camera connected to AUX IN to

video cassette recorder connected to the VCR1

OUT jack.

Press the AUX input source button to set

video output.

Press the CD input source button to set audio

output.

Now “CD” has been selected as the audio

input source and “AUX” as the video input

source.

Notes:

• If you change the input source during recording,

you will record the signals from the newly

selected input source.

• You cannot record the surround effects.

• Digital input signals are only output to the digital

outputs. There is no conversion from digital to

analog .

When connecting CD players and other digital

components, do not connect only the digital

terminals, but the analog ones as well.

400

MEMORY

TUNING

MODE

CLEAR

DSS/VCR2

AUX

VCR1

DVD

CD-R

TAPE

TUNER

S-DIRECT DISPLAY

A/D6.1CH INPUTVIDEO OFF

F/P

1. 2.

V SURROUND RECEIVER SR5400

MEMORY

TUNINGCLEAR

PHONES

ENTER

DSS/VCR2

AUX

VCR1

DVD

CD-R

TAPE

S-DIRECT

A/D6.1CH INPUTVIDEO OFF

F/P

OUND RECEIVER SR5400

MEMORY

TUNING

MODE

CLEAR

HONES

NTER

DSS/VCR2

AUX

VCR1

DVD

CD-R

TAPE

TUNER

S-DIRECT DISPLAY

A/D6.1CH INPUTVIDEO OFF

F/P

OSD

SLEEP

MUTE

AMPAUX

TUNER

TAPE

CDR/MD

DVD

POWER

VCR1

DSS/VCR2

VOL.VOL.

MAIN

OSD

SLEEP

MUTE

AMPAUX

TUNER

TAPE

CDR/MD

DVD

VCR1

DSS/VCR2

VOL.VOL.

TV MAIN

To cancel the 6.1 Ch. INPUT setting, press the 6.1

CH INPUT button on the front panel or press 6.1

CH IN on the remote.

Notes:

• When the 6.1 Ch. Input is in use, you may not

select a surround mode, as the external decoder

determines processing.

• In addition, there is no signal at the record outputs

when the 6.1 Ch. Input is in use.

PTY

ATT

F.DIRECT

DISP./RDS

TUNE/SEARCH

MODE

TREBLE

CHANNEL/SKIP

BASS

A/D

P.SCAN

6.1CH IN

STEREO

M-CH ST

MEMO

CLEAR

DISPLAY

NIGHT

CSII EX/ES DSP

DTS

S-DIRECT

AUTO

321

654

T.TONE

MENU OFF

SETUP/

/VCR

/ANT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-5400 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info