Bedienungsanleitung Marantz SR-6200 (Seite 3 von 31) (Englisch)

6580

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

IMPORTANT SAFETY

INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

This product was designed and manufactured to meet strict quality and

safety standards. There are, however, some installation and operation

precautions which you should be particularly aware of.

1. Read Instructions - All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions-The safety and operating instructions should

be retained for future reference.

3. Heed Warnings-All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions-All operating and use instructions should be

followed.

5. Cleaning-Unplug this video product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use a

damp cloth for cleaning.

6. Attachments-Do not use attachments not recommended by the

video product manufacturer as they may cause hazards.

7. Water and Moisture-Do not use this video product near water-for

example, near a bath tub, wash bowl, kitchen sink, or laundry tub,

in a wet basement, or near a swimming pool, and the like.

8. Accessories-Do not place this video product on an unstable cart,

stand, tripod, bracket, or table. The video product may fall,

causing serious injury to a child or adult, and serious damage to

the appliance. Use only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer, or sold with the video

product. Any mounting of the appliance should follow the

manufacturer’s instructions, and should use a mounting

accessory recommended by the manufacturer.

9. Ventilation-Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the video product

and to protect it from overheating, and these openings must not be

blocked or covered. The openings should never be blocked by

placing the video product on a bed, sofa, rug, or other similar

surface. This video product should never be placed near or over a

radiator or heat register. This video product should not be placed

in a built-in installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer’s instructions have

been adhered to.

10. Power Sources-This video product should be operated only from

the type of power source indicated on the marking label. If you are

not sure of the type of power supply to your home, consult your

appliance dealer or local power company. For video products

intended to operate from battery power, or other sources, refer to

the operating instructions.

11. Grounding or Polarization-This video product is equipped with a

polarized alternating-current line plug (a plug having one blade

wider than the other). This plug will fit into the power outlet only

one way. This is a safety feature. If you are unable to insert the

plug fully into the outlet, try reversing the plug. If the plug should

still fail to fit, contact your electrician to replace your obsolete

outlet. Do not defeat the safety purpose of the polarized plug.

AC POLARIZED PLUG

12. Power-Cord Protection-Power-supply cords should be routed so

that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords at plugs,

convenience receptacles, and the point where they exit from the

appliance.

13. Protective Attachment Plug - The appliance is equipped with an

attachment plug having overload protection. This is a safety

feature. See Instruction Manual for replacement or resetting of

protective device. If replacement of the plug is required, be sure

the service technician has used a replacement plug specified by

the manufacturer that has the same overload protection as the

original plug.

14. Outdoor Antenna Grounding-If an outside antenna or cable

system is connected to the video product, be sure the antenna or

cable system is grounded so as to provide some protection

against voltage surges and built up static charges. Section 810 of

the National Electrical Code, ANSI/NFPA No. 70-1984, provides

information with respect to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to an antenna

discharge unit, size of grounding conductors, location of antenna-

discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode. See Figure 1.

15. Lightning-For added protection for this video product receiver

during a lightning storm, or when it is left un-attended and unused

for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent damage

to the video product due to lightning and power-line surges.

16. Power Lines-An outside antenna system should not be located in

the vicinity of overhead power lines or other electric light or power

circuits, or where it can fall into such power lines or circuits. When

installing an outside antenna system, extreme care should be

taken to keep from touching such power lines or circuits as contact

with them might be fatal.

17. Overloading-Do not overload wall outlets and extension cords as

this can result in a risk of fire or electric shock.

18. Object and Liquid Entry-Never push objects of any kind into this

video product through openings as they may touch dangerous

voltage points or short-out parts that could result in a fire or

electric shock. Never spill liquid of any kind on the video product.

Marantz SR-6200 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info