Bedienungsanleitung Marantz SR-6400 (Seite 10 von 38) (Englisch)

6584

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

ENGLISH

REMOTE CONTROLLER

RC7300SRa

NAMES AND FUNCTIONS

c /

(open/close) button

Used to open or close the door.

Note:

• This button is unavailable for the SR6400.

Source POWER ON/OFF button

Used to turn specific sources (such as DVD

players, etc.) ON and OFF independently from the

rest of the system.

EQ button

Used to turn on or off HT (Home Theater)-EQ mode.

This mode compensates for the audio portion of a

movie sounding “bright”. When this button is

pressed, “EQ” indicator is illuminated.

V-OFF (video off) button

Used to turn off the video signal.

DVD operating buttons

(when DVD mode is selected)

AUDIO button

Used to select one of the audio languages.

ANGLE button

Used to change the different camera angles.

SUBTITLE button

Used to select one of the subtitle languages.

Numeric buttons 1 to 9, 0 / Surround

mode buttons

Numeric buttons

Used to enter figures in the selection of a tuner pre-

set station and station name preset or to select a CD

track number, etc. The functions of these buttons are

dependent on the function button selected.

Surround mode buttons (when AMP mode is

selected)

Used to select the surround mode.

CL (clear) / S-DIRECT (source direct)

button

Used to cancel certain memory or programming

operations.

(when AMP mode is selected)

Used to select the S-DIRECT (source direct) mode.

In source direct mode, the tone control circuitry is

bypassed.

⁄0

INPUT button

Used to select monitor input.

Note:

• This button is unavailable for SR6400.

⁄1

T.MODE button

(when TUNER mode is selected)

Used to select the auto stereo mode or mono

mode when the FM band is selected.

The “AUTO” indicator is illuminated in the auto

stereo mode.

⁄2

(TV) CH

buttons

Used to increase or decrease the TV channels.

⁄3

TOP MENU button

(when DVD mode is selected)

Used to call up the top menu of the DVD.

⁄4

Tone / Deck control buttons

Tone control buttons (when AMP mode is selected)

The TREBLE buttons are used to adjust the tone

control of high frequency sounds for the left and right

speakers.

The BASS buttons are used to adjust the tone con-

trol of low frequency sounds for the left, right and

subwoofer speakers.

Deck control buttons (when Tape mode is

selected)

The DECK A button is used to select deck A.

The DECK B button is used to select deck B.

The 1 2 buttons are used to change the direction.

⁄5

CURSOR / OK button

Used to operate on-screen and other displays

used by receivers and other components.

⁄6

CH SEL. (channel select) button

(when AMP mode is selected)

Used to call up SETUP MAIN MENU and adjust

speaker levels or 6.1 ch input level.

⁄7

SETUP button

(when AMP mode is selected)

Used to call up the SETUP MAIN MENU of the

SR6400.

Infrared window

Outputs and inputs-, infrared control signals.

LCD (Liquid Crystal Display)

Used to display information about currently

selected functions.

⁄0

⁄2

⁄3

⁄4

⁄5

⁄6

⁄7

⁄8

⁄9

‹4

‹3

‹2

‹1

‹0

¤9

¤8

¤6

¤5

¤0

¤2

¤3

¤4

¤7

¤1

⁄1

⁄8

CONTROL buttons

These buttons are used when operating the CD

player, TAPE deck, etc.

The function of these buttons are dependent on the

function button selected.

(when AMP mode is selected)

ATT button

When the input signal is too high and the voice dis-

torts even while adjusting the SR6400 VOLUME

control, turn on this function. “ATT” is illuminated

when this function is activated.

The input level is reduced. Attenuator is invalid for

the output signal of “REC OUT”.

Note:

• This function is unavailable while the digital input

is selected.

SPKR A/B button

Speaker mode is switched in the following sequence.

A → B → A+B → off

Note:

• The MULTI button is unavailable for SR6400.

⁄9

Input selector buttons/ FUNCTION

SELECTOR buttons (AUDIO/VIDEO

INPUT)

Used to switch the remote control to the command

sets for specific sources (amplifier, receiver, etc.),

thereby allowing a single remote control to control

up to 11 different components. To use these buttons

to switch the amplifier’s source, press the desired

button twice within 2 seconds. The AMP button is

used only to switch command set of the remote

control itself and therefore does not transmit any

signal. Further, the function buttons may also be

programmed to execute macros. (A macro allows a

complex string of operations to be performed in

series simply by pressing a single button.) One

button can be programmed to learn sequences

containing up to 10 commands. The following is an

example of such a sequence that can be activated

automatically using a macro:

Turn the receiver ON → Switch the function to

DVD → Set the Surround Mode to VIRTUAL →

Set the DVD player to Play.

Note:

• The AUX2 button is unavailable for SR6400.

¤0

EXIT button

(when AMP mode is selected)

Used to exit setup menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-6400 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info