Bedienungsanleitung Marantz SR-6400 (Seite 21 von 38) (Englisch)

6584

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

ENGLISH

SRS DIALOG:

Set the SRS DIALOG level between 0 and 6 in 1

level intervals with the or cursor buttons.

This can be popped out of the surround audio

effects, allowing the listener to easily discern what

the actors say.

If “NONE” was selected for the Center speaker

setting, in the Speaker size set up menu, then this

setting will not appear.

After you complete this portion of the set up, move

cursor to “MAIN” with the or cursor buttons and

press the OK button.

7 6.1 CH INPUT LEVEL

This sub-menu is to adjust the speaker levels for

6.1-channel input sources.

Here you will adjust the volume for each channel so

that they are all heard by the listener at the same

level.

Select “6.1CH IN” in the MAIN SETUP MENU

with the or cursor buttons, and press the

OK button.

To Select desired channel , press the or

cursor buttons.

Using the or cursor buttons, adjust the

volume level of each channel.

After you complete this portion of the set up,

move the cursor to “MAIN” with the or

cursor buttons and press the OK button.

Note:

•

These settings will be memorized to 6.1CH INPUT

source.

4 SURROUND

Select “SURROUND” in the SETUP MAIN

MENU with the or cursor buttons, and press

the OK button.

To select a desired content , press the or

cursor buttons.

SURR.MODE :

Select the desired surround mode with the or

cursor buttons.

HT-EQ :

Select to active the HT-EQ with the or cursor

buttons.

The tonal balance of a film soundtrack will be

excessively bright and harsh when played back

over audio equipment in the home. This is

because film soundtracks were designed to be

played back in large movie theater environments.

Activating the HT-EQ feature when watching a

film made for movie theaters corrects this and

restores the correct tonal balance.

The HT-EQ feature can be activated only while in

Dolby Pro Logic Mode, or while decoding Dolby

Digital or DTS encoded material.

LFE LEVEL :

Select the output level of the LFE signal included

in the Dolby Digital signal or the DTS signal.

Select 0 dB, -10 dB or OFF with the or cursor

buttons.

CHANNEL LEVEL

CENTER LEVEL:

Set the effect level of the center speaker between

–10 and +10 dB level in 1 dB level intervals.

• If “None” was selected for the Center speaker

setting, in the Speaker size set up menu, then this

setting will not appear.

SURR L LEVEL:

Set the level of the Surround left speaker between

–10 and +10 dB level in 1 dB level intervals.

• If “None” was selected for the Surround left

speaker setting, in the Speaker size set up menu,

then this setting will not appear.

4 SURROUND

SURR . MODE : AUTO

HT - EQ : OFF

LFE LEVEL : 0 dB

CENTER : 0 dB

SURR L : 0 dB

SURR R : 0 dB

SURR BACK : 0 dB

SUB W : 0 dB

MA I N E X I T

SURR R LEVEL:

Set the level of the Surround right speaker between

–10 and +10 dB level in 1dB level intervals.

• If “None” was selected for the Surround right

speaker setting, in the Speaker size set up menu,

then this setting will not appear.

SURR BACK LEVEL:

Set the effect level of the Surround Back speaker

between –10 and +10 dB level in 1 dB level

intervals.

• If “None” was selected for the Surround back

speakers setting, in the Speaker size set up menu,

then this setting will not appear.

SUB W LEVEL:

Set the effect level of the subwoofer speaker

between –15 and +10 dB level in 1 dB level

intervals.

• If “None” was selected for the Subwoofer speaker

setting, in the Speaker size set up menu, then this

setting will not appear.

After you complete this portion of the set up, move

the cursor to “MAIN” with the or cursor buttons

and press the OK button.

5 PL II (PRO LOGIC II) MUSIC

PARAMETER

Pro Logic II-Music mode creates a rich and enveloping

surround ambience from stereo sources such as CDs.

In this

mode, SR6400 includes three controls to

fine-tune the soundfield as follows.

Select “PRO LOGIC II ” in the SETUP MAIN MENU

with the or cursor buttons, and press the OK

button.

PARAMETER:

Select “DEFAULT” or “CUSTOM” with the or

cursor buttons.

If you select “CUSTOM”, you can adjust three

parameters as listed below.

PANORAMA:

Select the Panorama mode On or Off with the or

cursor buttons.

Panorama wraps the sound of the front left and right

speakers around you, for an exciting perspective.

DIMENSION:

Set the Dimension level between 0 and 6 level in

1 level intervals with the or cursor buttons.

Adjust the soundfield either towards the front or

towards the rear.

This can be useful to help achieve a more

suitable balance from all the speakers with

certain recordings.

CENTER WIDTH:

Set the Center width level between 0 and 7 in 1

level intervals with the or cursor buttons.

Center Width allows you to gradually spread the

center channel sound into the front left and right

speakers.

At its widest setting, all the sound from the

center is mixed into the left and right.

This control may help achieve a more spacious

sound or a better blend for the front image.

If “None” was selected for the Center speaker

setting, in the Speaker size set up menu, then this

setting will not appear.

After you complete this portion of the set up, move

cursor to “MAIN” with the or cursor buttons and

press the OK button.

6 CS II (CIRCLE SURROUND II)

PARAMETER

Select “CS II ” in the SETUP MAIN MENU with

the or cursor buttons, and press the OK

button.

To Select desired contents as below, press

the or cursor buttons.

TRUBASS:

Set the TRUBASS level between 0 and 6 level in

1 level interval with the or cursor buttons.

TRUBASS produced by the speakers are an

octave below the actual physical capabilities of the

speakers adding exciting, deeper bass effects.

5PL II MUS I C PARAME T ER

PARAMETER : DE FAUL T

PANORAMA : OF F

DIMENSION : 3

CENTER WI DTH : 3

MA I N E X I T

6CSII PARAMETER

TRUBASS : 0

SRS D I ALOG : 0

MA I N EX I T

76.1CHINPUTLEVEL

FRONT L : 0 dB

CENTER : 0 dB

FRONT R : 0 dB

SURR . R : 0 dB

SURR .BACK : 0 dB

SURR . L : 0 dB

SUB W : 0 dB

MA I N EX I T

Marantz SR-6400 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info