Bedienungsanleitung Marantz SR-6400 (Seite 34 von 38) (Englisch)

6584

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

ENGLISH

USING MACROS

The following procedure will show how to use the

function buttons for which you have programmed

macros.

Press the Function button for the desired

macro for 3 seconds.

• MACRO is displayed on the LCD for

approximately 1 second, after which the

number of steps in the macro is displayed

on the LCD.

• The remote control will do nothing if no

macros are programmed. The macro steps

are executed in order and the names of

their buttons are displayed on the LCD.

Also, the step numbers displayed on the

LCD disappear as each step is executed.

After all macro commands have been

transmitted, the remote control returns to AMP

in use mode.

EXAMPLES OF MACRO PROGRAMS

Example 1

Change the input source for the amplifier to CD

and play the 3rd track on a CD in the CD player.

Press and hold the T.MODE and MENU

button until the MACRO is displayed on the

LCD.

• LEARN and MACRO is displayed blinking.

Press the CD Function button. CD-M is

displayed on the LCD.

Press CD, 3 , and 3 buttons.

When you are finished programming the

macro, press the OK button until the display

returns to USE mode.

Now, execute the macro you just programmed.

Press the CD Function button for 3 seconds.

• The macro commands are transmitted to

the components in order, and the steps of

the operations are displayed on the LCD in

order.

Example 2

Turn the main amplifier ON → Change the

amplifier’s input source to DVD → Set the Surround

mode to VIRTUAL → Set the DVD player to PLAY.

Press and hold the T.MODE and MENU

button until the MACRO is displayed on the

LCD.

•

LEARN and MACRO are displayed blinking.

Press the DVD Function button .

• Here the DVD Function button is used as

the macro button, but any function button

can in fact be used.

To set the various steps of the macro, press

the following buttons in order:

(1) AMP*→ (2) POWER ON → (3) DVD → (4)

AMP*→ (5) 8 (VIRTUAL) → (6) DVD* → (7)

3 .

When you are finished programming the

macro, press the OK button until the display

returns to USE mode.

Now, execute the macro you just programmed.

Press the DVD Function button for 3 seconds.

The macro commands are transmitted in

order, and the steps of the operations are

displayed on LCD in order.

• When executing this macro, function

operations AMP* and DVD* only switch the

command set of the remote controller and

no signal is transmitted to the component.

CLEARING MACRO PROGRAMS

The following procedure is used to erase macros

you have programmed into the remote controller’s

memory.

Press and hold the T.MODE and MENU

button until the MACRO is displayed on the

LCD.

•

LEARN and MACRO are displayed blinking.

Press and hold the CL button, then press the

button for the Function to be cleared (in this

case DVD) for 3 seconds.

DVDCL will appear on the LCD.

(1)

(3)

(2)

(5)

(2)

(1) (4)

(3) (6)

(7)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-6400 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info