Bedienungsanleitung Marantz SR-7500 (Seite 11 von 56) (Englisch)

6598

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ENGLISH

REMOTE CONTROLLER

RC8500SR

NAMES AND FUNCTIONS

Infrared Transmitter and Learning

Sensor

This transmitter emits infrared light. Press the

buttons while pointing the transmitter towards the

infrared receiver window of the SR7500 or other

AV equipment. Be sure to also point towards other

remote controls when using the learning function.

POWER ON and OFF buttons

(When AMP mode is selected)

These buttons are used to turn the SR7500 on or

off.

SOURCE ON/OFF button

This button is used to turn a specific source (such

as a DVD player) on or off independently from the

rest of the system.

M (Mode) button

This button is used to program Macros. Pressing

this button switches between Normal mode and

Macro mode.

The > button is used to move to the next page. Up

to 20 programs (4 pages) can be made. Holding

down the M button for three seconds or more

switches to the Setup mode, where the Setup

menu is shown on the LCD. The Setup menu has

four pages, and the > button is used to move to the

next page. Pressing the > button from page 4

returns you to page 1.

D1 to D5 (Direct) buttons

Five types of direct operations can be performed

for each of the 12 source buttons such as the DVD,

television, amplifier, and other AV equipment. The

pages can be switched, so 4 pages × 5 types = 20

operations can be performed for a single source.

The text display can also be changed.

> (Page) button

This button is used to switch pages for the Direct

button. The current page is shown on the LCD.

VOL (Volume) button

This button is used to adjust the volume for the

amplifier and television.

Note:

• Set the AMP mode to use this button with the

SR7500.

2 31

5 64

MEMO

CLEAR

DSS

AMP

AUX2

AUX1

TAPE

TUNER

CD-R

VCRDVD

SOURCE

OFF

ON/OFF

POWER

VOL

MUTE

EXIT

GUIDE

TEST

CH.SEL

LIP·SYNC

THX

SURR

7.1CH

ATT

SPK-AB

DISP

OSD

SLEEP

LIGHT

Learning Remote Controller

RC8500SR

⁄1

⁄2⁄6

⁄7

⁄8

⁄9

¤0

¤1

⁄3

⁄4

⁄5

⁄0

REMOTE CONT. IN/OUT terminals

Connect to a Marantz component equipped with

remote control (RC-5) terminals.

AUDIO IN/OUT (CD, TAPE, CD-R, TV,

DVD, VCR1, DSS/VCR2)

These are the analog audio inputs and outputs.

There are 7 audio inputs (4 of which are linked to

video inputs) and 4 audio outputs (2 of which are

linked to video outputs). The audio jacks are

nominally labeled for cassette tape decks,

compact disc players, DVD players and etc.... The

audio inputs and outputs require RCA-type

connectors.

DIGITAL INPUT (Dig.1 - 6) / OUTPUT

(coaxial, optical)

These are the digital audio inputs and outputs.

There are 3 digital inputs with coaxial jacks, 3 with

optical jacks.

The inputs accept digital audio signals from a

compact disc, LD, DVD, or other digital source

component.

For digital output, there is 1 coaxial output and 1

optical output.

The digital outputs can be connected to MD

recorders, CD recorders, DAT decks, or other

similar components.

DVI-D INPUT / OUTPUT (SR8500 only)

This unit has two DVI-D inputs and one DVI-D

output. The input function can be selected from the

SETUP MAIN MENU.

MUTE button

This button is used to mute the audio for the

SR7500 and television.

Note:

• Set the AMP mode to use this button with the

SR7500.

GUIDE button

This button is used to display the menus for the

DVD player, DSS (satellite broadcasting tuner), or

other AV equipment.

(when AMP mode is selected)

This button is used to select the LIP.SYNC mode.

⁄0

EXIT button

(when AMP mode is selected)

This button is used to cancel settings in the setup

menu.

⁄1

Numeric buttons

These buttons are used to switch between 0 to 9 of

the source components. If the source is set to the

amplifier, these buttons are used to perform

operations.

(when AMP mode is selected)

(1) TEST button

Used to enter the test tone menu.

(2) CH SEL. (channel select) button

Used to call up SETUP MAIN MENU and adjust

speaker levels or 7.1 ch input level.

(3) SURR (surround) button

Used to select the surround mode.

(4) 7.1CH button

Press this button to select the output of an external

multi channel decoder.

(5) ATT button

When the input signal is too high and the voice

distorts even by throttling the SR7500 VOLUME

control, turn on this function. “ATT” is indicated

when this function is activated.

The input level is reduced. Attenuator is invalid for

use with the output signal of “REC OUT”.

Note:

• This function is unavailable during the digital

input is selected.

(6) SPK-AB button

Speaker mode is switched in the following

sequence.

A → B → A+B → off

SR7500U DFU_01_ENG 1_3 04.9.22, 5:02 PMPage 8 Adobe PageMaker 6.5J/PPC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-7500 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-7500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info