Bedienungsanleitung Marantz SR-7500 (Seite 27 von 56) (Englisch)

6598

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ENGLISH

The signal cannot be converted from the

component to the video or S-video.

Notes of OSD menu:

• The setup menu can be displayed through all

video out (COMPONENT, S-VIDEO, VIDEO).

• The setting informations (e.g. volume setting) are

displayed through all video out when the VIDEO

CONVERT function are set ENABLE.

Note:

No setting information is displayed when the

signal is emitted from the COMPONENT IN to

COMPONENT OUT.

• The setting informations (e.g. volume setting) are

displayed through the S-VIDEO or VIDEO out

when the VIDEO CONVERT function are set

DISABLE. When the S-VIDEO and VIDEO

outputs are used simultaneously, the setting

informations are displayed through the S-VIDEO

out only.

SELECTING THE SURROUND MODE

Example: AUTO SURROUND

(Using the SR7500)

To select the surround mode during playback,

press the AUTO button on the front panel.

(Using the remote control unit)

To select the surround mode, press the AMP

button and press the > button until PAGE1 is

displayed. Press the AUTO (D1) button.

ADJUSTING THE MAIN VOLUME

Adjust the volume to a comfortable level using the

VOLUME control knob on the front panel or VOL

/ buttons on the remote.

To increase the volume, turn the VOLUME knob

clockwise or press VOL

button on the remote, to

decrease the volume, turn counterclockwise or

press VOL button on the remote.

Notes:

• The volume can be adjusted within the range of –

∞ to 18 dB, in steps of 1 dB.

•

However, when the channel level is set as described

on page 20, if the volume for any channel is set at

+1 dB or greater, the volume cannot be adjusted up

to 18 dB.

(In this case the maximum volume adjustment

range is “18 dB - Maximum value of channel level)

ADJUSTING THE TONE (BASS &

TREBLE) CONTROL

During a listening session you may wish to adjust

the Bass and Treble Control to suit your listening

tastes or room acoustics.

AV SURROUND RECEIVER SR7500

POWER ON/STANDBY PHONES

STANDBY

DISP MULTI AUTO TUNED

SLEEP

SURR DIRECT

AUTO

INPUT SELECTOR

AMP

AUX2

AUX1

TAPE

TUNER

CD-R

LIGHT

Learning Remote Controller

RC8500SR

AMP

VOL

USE

PAGE

123

SL S SR

LFE

DIGITAL

SURROUND

GHT

EAK ANALOG

DIGITAL

ATT

PCM

AAC

AUX 1 INPUT

AUDIOS-VIDEODIGITAL VIDEO L R

DOWN

VOLUME

2 31

VOL

MUTE

EXIT

GUIDE

TEST

CH.SEL

LIP.SYNC

SURR

71CH

ATT

SPK-AB

VOL

AMP

AUX2

AUX1

TAPE

TUNER

CD-R

LIGHT

Learning Remote Controller

RC8500SR

AMP

VOL

USE

PAGE

VIDEO CONVERT

When this function is activated, the video or

S-video signal can be emitted from the video, S-

video or component video output terminal.

To activate this function, select VIDEO CONVERT

in PREFERENCE menu and set ENABLE.

Notes:

• The component video signal is emitted only from

component video output terminal.

When the video equipment is connected by

component terminal, connect the monitor and

SR7500 by the component terminal.

• This function is unavailable for the REC out

terminal.

•

This function is unavailable for the still picture, fast

forward and reverse playing of the video component.

• If, while attempting to use the video convert

feature, the SR7500 cannot synchronize with the

display device, “NO SIGNAL” appears on the

monitor, or noise is generated, this feature cannot

be used. All of these signs are caused by

equipment incompatibility; there is nothing

wrong with the SR7500.

In such case, set VIDEO CONVERT in the

PREFERENCE menu to DISABLE. Also, connect

the video input signal to the display device via the

MONITOR OUT terminal under VIDEO and the

S-video input signal to the display device via the

MONITOR OUT terminal under S-VIDEO.

Example:

Monitor is connected with the component.

Monitor is connected with the video or S-video.

BASIC OPERATION

(PLAY BACK)

SELECTING AN INPUT SOURCE

Before you can listen to any input media, you must

first select the input source on the SR7500.

Example : DVD

To select DVD, turn the INPUT FUNCTION

SELECTOR knob on the front panel or simply

press the DVD button on the remote.

After you have selected DVD, simply turn on the

DVD player and play the DVD.

• As the input source is changed, the new input

name will appear momentarily an OSD

information on the video display. The input

name will also appear in the display, on the

front-panel.

• As the input is changed, the SR7500 will

automatically switch to the digital input,

surround mode, attenuation, and night mode

status which were entered during the

configuration process for that source.

• When an audio source is selected, the last video

input used remains routed to the VCR1 & DSS/

VCR2 Outputs and Monitor Output. This

permits simultaneous viewing and listening to

different sources.

• When a Video source is selected, the video

signal for that input will be routed to the Monitor

Output jacks and will be viewable on a TV

monitor connected to the SR7500.

If a component video input is connected to the

DVD or DSS component inputs, it will be routed

to the Component Video Output. Make certain

that your TV is set to the proper input to view the

signal.

DVI-D INPUT (SR8500 only)

When DVI-D is set as the input source, monitor

output is DVI-D as well.

DSS

AMP

AUX2

AUX1

TAPE

TUNER

CD-R

VCRDVD

LIGHT

Learning Remote Controller

RC8500SR

DVD

AV SURROUND RECEIVER SR7500

ENTER

VIDEO

or S-VIDEO

component

AV SURROUND RECEIVER SR7500

ENTER

VIDEO

or S-VIDEO

VIDEO

or S-VIDEO

AV SURROUND RECEIVER SR7500

ENTER

VIDEO

or S-VIDEO

or component

component

SR7500U DFU_01_ENG 2_3 04.9.22, 5:09 PMPage 24 Adobe PageMaker 6.5J/PPC

Marantz SR-7500 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-7500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info