ENGLISH
18
SETUP
After all components are connected, initial setup
must be performed.
ON SCREEN DISPLAY MENU
SYSTEM
The SR7500 incorporates an on-screen menu
system, which makes various operations possible
by using the cursor ( , , , ) and ENTER
buttons on the remote control or on the front panel.
Note:
•
To view the on-screen displays, make certain you
have made a connection from the Monitor Out jack
on the rear panel to the composite, S-Video,
component video input of your TV or projector.
(see page 14)
1.
Press the AMP button of the remote control.
(This step is not needed when operating the
setup menus from the receiver itself.)
2.
Press the MENU button on the remote control
or set to display the “SETUP MAIN MENU” of
the OSD menu system.
There are 8 items in the SETUP MAIN MENU.
3.
Select a desired sub-menu with the
or
cursor buttons, and press the ENTER button
to enter. The display will change to the
selected sub-menu. You can lock the
condition of setup to each sub-menu with the
or
or cursor buttons.
Note:
• If you desire to adjust any sub-menu, you need to
set it to UNLOCKED.
4.
If you desire to exit from this menu system,
press the EXIT button, or move the cursor to
EXIT and press the ENTER button.
Note:
• Settings are entered with the ENTER button on
the unit or the OK button on the remote controller.
When using the remote control, use the OK button
as if it were the ENTER button.
