Bedienungsanleitung Marantz SR-8200 (Seite 37 von 53) (Englisch)

6602

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

ENGLISH

BASIC OPERATION (PLAY BACK)

SELECTING AN INPUT SOURCE.

Before you can listen to any input media, you must first select the input

source at the SR8200.

E.G. : DVD

To select DVD, simply press the DVD button on the front panel or tap

DVD on the remote.

After you have selected DVD, simply turn on the DVD player and play

the DVD.

• As the input source is changed, the new input name will appear

momentarily as an OSD information on the video display.The input

name will also appear in the display on the front-panel.

• As the input is changed, the SR8200 will automatically switch to the

digital input, surround mode, attenuation, and night mode status

that were entered during the configuration process for that source.

• When an audio source is selected, the last video input used remains

routed to the VCR1 & VCR2 Outputs and Monitor 1&2 Outputs.

This permits simultaneous viewing and listening to different

sources.

• When a Video source is selected, the video signal for that input will

be routed to the Monitor 1&2 Outputs jack and will be viewable on

a TV monitor connected to the SR8200.

If a component video input is connected to the DVD or DSS

component inputs, it will be routed to the Component Video

Output. Make certain that your TV is set to the proper input to view

the signal.

SELECTING THE SURROUND MODE

E.G. : AUTO SURROUND

To select the surround mode during playback, turn the SELECT knob

on the front panel or tap the surround mode icon on the remote .

ADJUSTING THE MAIN VOLUME

Adjust the volume to a comfortable level using the VOLUME control

knob on the front panel or VOL / buttons.

To increase the volume, turn the VOLUME knob to the right or press

VOL button on the remote, to decrease the volume, turn the it to the

left or press VOL button on the remote.

Notes:

• The volume can be adjusted within the range of – ∞ to 18 dB, in

steps of 1 dB.

• However, when the channel level is set as described on page 25,

if the volume for any channel is set at +1 dB or greater, the

volume cannot be adjusted up to 18 dB.

(In this case the maximum volume adjustment range is “18 dB -

(Maximum value of channel level)”.)

ADJUSTING THE TONE(BASS & TREBLE)

CONTROL.

During a listening session you may wish to adjust the Bass and Treble

Control to suit your listening tastes or room acoustics.

(using the SR8200)

To change the selector mode , press SELECT button, until "BASS" or

"TREBLE" is shown on front display.

Turn the SELECTOR knob to desired level of tone control.

(Using the remote control unit)

To adjust the bass effect , tap Bass+ or Bass– on the remote.

To adjust the treble effect , tap Treble+ or Treble– on the remote.

Notes :

• The tone control function can work in the AUTO Surround,

Stereo, Dolby PL2, DTS, DTS-ES, and Multi Ch. Stereo mode.

• If digital input signal is PCM 96kHz, tone control is disable.

VOL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-8200 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info