Bedienungsanleitung Marantz SR-8300 (Seite 38 von 56) (Englisch)

6604

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ENGLISH

SURROUND

Select “SURROUND” in MAIN SETUP MENU with Up or Down

cursor button, and press the OK button.

To select a desired content , press Up or Down cursor button.

SURR-MODE : Select the desired surround mode with Left or

Right cursor button.

CINEMA RE-EQ™ : Select to active the Cinema Re-EQ™ with Left

or Right cursor button.

The tonal balance of a film soundtrack will be

excessively bright and harsh when played back

over audio equipment in the home. This is

because film soundtracks were designed to be

played back in large movie theater environments.

Activating the Cinema Re-EQ™ feature when

watching a film made for movie theaters corrects

this and restores the correct tonal balance.

Cinema Re-EQ™ is therefore not necessary for

material that was not designed for movie

theaters (for example, sports programming,

television shows, made for TV movies, etc..).

The Cinema Re-EQ™ feature can be activated

only while in Dolby Pro Logic Mode, or while

decoding Dolby Digital or DTS encoded

material.

LFE LEVEL : Select the output level of the LFE signal included

in the Dolby Digital signal or the DTS signal.

Select 0dB, -10 dB or OFF with Left or Right

cursor button.

The level is ordinarily set to 0 dB except DTS-

Music mode. In the DTS-Music mode, default

level is set to -10 dB.

EFFECT LEVEL

SURR L/R EFFECT: Set the effect level of the Surround speaker

between –3 and +3 level in 1 level interval .

• If “None” was selected for the Surround speakers setting in the

Speaker size, then this setting will not appear.

SURR BACK EFFECT : Set the effect level of the Surround Back

speaker between –3 and +3 level in 1 level

interval .

• If “None” was selected for the Surround back speakers setting

in the Speaker size, then this setting will not appear.

CENTER EFFECT : Set the effect level of the center speaker between

–3 and +3 level in 1 level interval .

• If “None” was selected for the Center speaker setting in the

Speaker size, then this setting will not appear.

SUB W EFFECT : Set the effect level of the subwoofer speaker

between –3 and +3 level in 1 level interval .

• If “None” was selected for the Subwoofer speaker setting in the

Speaker size, then this setting will not appear.

Note:

• These effect level set up are available only while in HALL,

MATRIX, MOVIE, Multi CH. STEREO.

If you finish the setup in this item, move cursor to “MAIN” with Up or

Down cursor buttons and press OK button.

4 SURROUND

SURR . MODE : AUTO

C I NEMA RE - EQ : OFF

LFE LEVEL : 0 dB

SURR L /R EFFECT :

∗∗

∗

∗∗

∗

∗∗

∗ dB

SURR BACK EFFECT :

∗∗

∗

∗∗

∗

∗∗

∗ dB

CENTER EFFECT :

∗∗

∗

∗∗

∗

∗∗

∗ dB

SUB W EFFECT :

∗∗

∗

∗∗

∗

∗∗

∗ dB

MA I N E X I T

PLII (PRO LOGIC II ) MUSIC PARAMETER

Pro Logic II-Music mode creates a rich and enveloping surround

ambience from stereo sources such as CDs.

In this

mode, SR8300 includes three controls to fine-tune the

soundfield as follow.

Select “PRO LOGIC II ” in MAIN SETUP MENU with Up or Down

cursor button, and press the OK button.

PARAMETER: Select “DEFAULT” or “CUSTOM” with Left or

Right cursor button

If you select “CUSTOM”, you can adjust three

parameters as follow

PANORAMA: Select the Panorama mode On or Off with Left or

Right cursor button.

Panorama wraps the sound of the front left and

right speakers around you for an exciting

perspective.

DIMENSION: Set the Dimension level between 0 and 6 level in 1

level interval with Left or Right cursor button.

Adjust the soundfield either towards the front or

towards the rear.

This can be useful to help achieve a more suitable

balance from all the speakers with certain

recordings.

CENTER WIDTH: Set the Center width level between 0 and 7 level in

1 level interval with Left or Right cursor button.

Center Width allows you to gradually spread the

center channel sound into the front left and right

speakers.

At its widest setting, all the sound from the center is

mixed into the left and right.

This control may help achieve a more spacious

sound or a better blend of the front image.

If “None” was selected for the Center speaker

setting in the Speaker size, then this setting will not

appear.

If you finish the setup in this menu, move cursor to “MAIN” with Up or

Down cursor buttons and press OK button.

CS II (CIRCLE SURROUND II) PARAMETER

Select “CS II” in MAIN SETUP MENU with Up or Down cursor

button, and press the OK button.

To Select desired contents as below, press Up or Down cursor

button

TRUBASS: Set the TRUBASS level between 0 and 6 level in 1

level interval with Left or Right cursor button.

TRUBASS produced by the speakers to be an octave

below the actual physical capabilities of the speakers

adding exciting, deeper bass effects.

5PLII -MUS I C PARAMETER

PARAMETER : DEFAULT

PANORAMA : OFF

DIMENSION : 4

CENTER WI DTH : 0

MA I N E X I T

6CSII PARAMETER

TRUBASS : 0

SRS D I ALOG : 0

MA I N EX I T

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-8300 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-8300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info