Bedienungsanleitung Marantz SR-8300 (Seite 9 von 57) (Englisch)

6604

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

ENGLISH

FRONT PANEL

u MEMO (memory) button

Press this button to enter the tuner preset memory numbers or station

names.

i TUNING UP / DOWN buttons

Press thses buttons to change the frequency or the preset number.

o F/P (FREQUENCY / PRESET) button

During reception of AM (MW/LW) or FM, you can change the function

of the UP/DOWN buttons for scanning frequencies or selecting preset

stations by pressing these buttons.

!0 T-MODE button

Press this button to select the auto stereo mode or mono mode when

the FM band is selected.

The “AUTO” indicator lights in the auto stereo mode.

!1 P.SCAN (preset scan) button

This button is used to scan preset stations automatically.

When pressed, the tuner starts scanning the all preset stations. Press

again to cancel the P-SCAN.

!2 VOLUME control knob

Adjusts the overall sound level. Turning the control clockwise

increases the sound level.

!3 ATT (Attenuate) button

If the selected analog audio input signal is greater than the capable

level of internal processing, PEAK indicator will light. If this happens,

you should press the ATT button. “ATT” is displayed when this

function is activated.

The signal-input level is reduced by about the half. Attenuation will not

work with the output signal of “REC OUT” (TAPE, CD-R/MD, VCR1

and VCR2 output). This function is memorized for each input function.

AV SURROUND RECEIVER SR8300

POWER ON/OFF

STANDBY

VOLUME

UPDOWN

PHONES

SELECT MUTE ATTENTER

SELECTOR

NIGHT

7.1CH-IN DSS TAPE CD-R TUNERCDDVD TV VCR 1 VCR2/DVD-R

MULTI-SPK

MULTI ROOM

AUX1S-DIRECT

AUX2A/D

SLEEP

T-MODE

TUNINGDOWN UP

P-SCANF/P

AUX1 INPUT

AUDIO

VIDEO

S-VIDEO

DIGITAL

MEMO

CLEARDISPLAY

@5 @4

!6 !4!5 !3

@2 @0 !8

@1 !9

!2!1!0oiuytrewq

@7@6

q POWER switch and STANDBY indicator

You can turn on and off the unit’s power using the front panel power

switch.

However, if you turn the unit off with the front panel switch, the unit

goes completely off rather than to the “standby mode” (Red LED

indicator light glows in the standby mode).

The unit cannot be turned on with the remote control when it is not in

the standby mode. When the red LED is on, the unit can be turned on

via the remote control or by pressing any input selector button on the

front panel.

w SELECT (MULTI FUNCTION MODE

SELECT) button

Press this button to change the mode for MULTI FUNCTION control

dial.

e SURROUND MODE Selector & MULTI

FUNCTION control dial

This dial changes surround mode sequentially or select contents of

OSD menu system.

r ENTER (MULTI FUNCTION ENTER)

button

Press this button to enter the setup by MULTI FUNCTION dial.

t DISPLAY mode button

When this button is pressed, the FL display mode is changed as

NORMAL → Auto Off → Off and the display off indicator(DISP) lights

up in condition of DISPLAY OFF.

y CLEAR button

Press this button to cancel the station-memory setting mode or preset

scan tuning.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-8300 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-8300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info