Bedienungsanleitung Marantz SR-8300 (Seite 43 von 57) (Englisch)

6604

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

ENGLISH

CIRCLE SURROUND II (CSII-CINEMA, CSII-MUSIC, CSII-MONO)

Circle Surround is designed to enable multi-channel surround sound

playback of non-encoded and multi-channel encoded material.

Backward compatibility provides listeners with up to 6.1 channels of

surround performance from entire collection of music and film,

including broadcast, videotape and stereo recorded music.

Regarding to source material, you can select CSII-Cinema mode,

CSII-Music mode or CSII-Mono mode.

Note:

• CS II mode is available to 2ch input signal which is encoded

Dolby Digital or PCM format.

• PCM-audio signals can be subjected to CSII processing when

the sampling frequency is 32 kHz, 44.1 kHz or 48 kHz.

MULTI CH. STEREO

This mode is used to create a wider, deeper and more natural

soundstage from two channel source material.

This is done by feeding the left channel signal to both left front and left

surround speaker and the right channel signal to both right front and

right surround speaker. Additionally, the center channel reproduces a

mix of the right and left channel.

VIRTUAL

This mode creates a virtualized surround sound experience from a

two-speaker (front L and R) playback system playing any multi-

channel audio source (such as found on DVDs and digital

broadcasts), including Dolby Digital, , Dolby Pro Logic or DTS.

CAUTION

NOTE for Dolby Digital Surround EX signal

* When playing Dolby Digital Surround EX-encoded software in 6.1

channels, it is required to set the THX Surround EX mode. Note that

some of Dolby Digital Surround EX-encoded software does not

contain the identification signal. In this case, set the THX Surround

EX manually.

NOTE for 96kHz PCM audio

* AUTO, Source- DIRECT, and STEREO modes can be used when

playing PCM signals with a sampling frequency of 96 kHz (such as

from DVD-Video discs that contain 24 bit, 96 kHz audio). If such

signals are input during playback in one of the other surround

modes, output from SR8300 will be muted.

* Certain DVD player models inhibit digital output. For details, refer to

the player’s operation manual.

* Some DVD formatted discs featured copy protection. When using

such disc, 96 kHz PCM signal is not output from the DVD player. For

details, refer to the player's operation manual.

NOTE for DTS signal

* Connected DVD-player, laser-disc player or CD-player needs to

support DTS-digital output. You may not be able to play some DTS

source signals from certain CD players and LD players even if you

connect the player to the SR8300 digitally. This is because the

digital signal has been processed (such as the output level,

sampling frequency, or frequency response) and the SR8300

cannot recognize the signal as DTS data.

* If you press the PAUSE or SKIP button on the player while playing a

DTS source, a short noise may be heard. This is not a malfunction.

In such cases, select the surround mode the “DTS” or “DTS-ES”.

* If DTS cinema, DTS music or DTS-ES mode is selected, digital

input cannot be switched to analog input.

* When the analog input function has been selected, Surround mode

cannot be switched to DTS cinema, DTS music or DTS-ES mode.

* While signals from DTS-laser disc or CD are playing in another

Surround mode, you cannot switch to digital input or from digital

input to analog input by INPUT SETUP in OSD menu system or A/D

button.

* You cannot listen to DTS-encoded source in MULTI ROOM.

* The outputs for the VCR 1 OUT, VCR 2 OUT, TAPE OUT, and CD-

R OUT output analog audio signals. Do not record from CDs or LDs

that support DTS using these outputs. If you do, the DTS-encoded

signal will be recorded as noise.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-8300 Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-8300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info