Bedienungsanleitung Marantz SR-9200 (Seite 9 von 14) (Englisch)

6610

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

ENGLISH

SURROUND

Select “SURROUND” in MAIN SETUP MENU with Up or Down

cursor button, and press the OK button.

To select a desired content , press Up or Down cursor button.

SURR-MODE : Select the desired surround mode with Left or

Right cursor button.

CINEMA RE-EQ™ : Select to active the Cinema Re-EQ™ with Left

or Right cursor button.

The tonal balance of a film soundtrack will be

excessively bright and harsh when played back

over audio equipment in the home. This is

because film soundtracks were designed to be

played back in large movie theater environments.

Activating the Cinema Re-EQ™ feature when

watching a film made for movie theaters corrects

this and restores the correct tonal balance.

Cinema Re-EQ™ is therefore not necessary for

material that was not designed for movie

theaters (for example, sports programming,

television shows, made for TV movies, etc..).

The Cinema Re-EQ™ feature can be activated

only while in Dolby Pro Logic Mode, or while

decoding Dolby Digital or DTS encoded material.

LFE LEVEL : Select the output level of the LFE signal included

in the Dolby Digital signal or the DTS signal.

Select 0dB, -10 dB or OFF with Left or Right

cursor button.

The level is ordinarily set to 0 dB except DTS-

Music mode. In the DTS-Music mode, default

level is set to -10 dB.

EFFECT LEVEL

SURR L/R EFFECT: Set the effect level of the Surround speaker

between –3 and +3 level in 1 level interval .

• If “None” was selected for the Surround speakers setting in the

Speaker size, then this setting will not appear.

SURR BACK EFFECT : Set the effect level of the Surround Back speaker

between –3 and +3 level in 1 level interval .

• If “None” was selected for the Surround back speakers setting

in the Speaker size, then this setting will not appear.

CENTER EFFECT : Set the effect level of the center speaker between

–3 and +3 level in 1 level interval .

• If “None” was selected for the Center speaker setting in the

Speaker size, then this setting will not appear.

SUB W EFFECT : Set the effect level of the subwoofer speaker

between –3 and +3 level in 1 level interval .

• If “None” was selected for the Subwoofer speaker setting in the

Speaker size, then this setting will not appear.

Note:

• These effect level set up are available only while in HALL,

MATRIX, MOVIE, CSII, Multi CH. STEREO.

If you finish the setup in this item, move cursor to “MAIN” with Up or

Down cursor buttons and press OK button.

4 SURROUND

SURR . MODE : AUTO

CINEMA RE-EQ : OFF

LFE LEVEL : 0 dB

SURR L /R EF FECT :

∗∗

∗

∗∗

∗

∗∗

∗ dB

SURR BACK EFFECT :

∗∗

∗

∗∗

∗

∗∗

∗ dB

CENTER EFFECT :

∗∗

∗

∗∗

∗

∗∗

∗ dB

SUB W EFFECT :

∗∗

∗

∗∗

∗

∗∗

∗ dB

MA I N E X I T

PREFERENCE

Select “PREFERENCE” in MAIN SETUP MENU with Up or Down

cursor button, and press the OK button.

To select a desired content, press Up or Down cursor button.

TV AUTO: Select the TV AUTO ON/OFF function to enable or

disable with Left or Right cursor button.

(refer to page 43)

OSD Info: Select the OSD information function to enable or

disable with Left or Right cursor button.

If you select “ENABLE”, SR9300 will display the status

of the feature (Volume up/down, input select, etc..) on

the TV monitor. But if you do not desire this

information, select “DISABLE “.

DIG. OUT: Select the digital source to output the DIGITAL OUT

terminals with Left or Right cursor button.

This is for digital dubbing to a CD-R recorder or MD

deck. (See page 44)

The source is switched in the following sequence.

SOURCE →DIG.1 →DIG.2 → → →DIG.8 →DIG.9 →

AUX →OFF →SOURCE →

SUB-W OUT: “THX” position is required, but If you desire an

additional front L/R mixed subwoofer output in the

STEREO mode, select “L/R MIX” with Left or Right

button.

If you finish the setup in this item, move cursor to “MAIN” with Up or

Down cursor buttons and press OK button.

3PREFERENCE

TV-AUTO : DISABLE

OSD I NFO : ENABLE

DIGITAL OUT : SOURCE

SUBWOOFER OUT : THX

MA I N E X I T

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-9200 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-9200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info