Bedienungsanleitung Marantz SR-9300 (Seite 14 von 57) (Englisch)

6612

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

ENGLISH

, COMPONENT VIDEO INPUT/OUTPUT

If your DVD player or other device has component video connectors,

be sure to connect them to these component video connectors on the

SR9300. The SR9300 has four component video input connectors to

obtain the color information (Y, C

, C

) directly from the recorded DVD

signal or other video component and one component video output

connector to output it directly into the matrix decoder of the display

device.

By sending the pure DVD component video signal directly, the DVD

signal forgoes the extra processing that normally would degrade the

image. The result is vastly increased image quality, with incredibly

lifelike colors and crisp detail.

Notes:

• This component video output is available to OSD menu system.

. Speaker outputs terminals (for Main

room)

Seven terminals are provided for the front left, front right, front center,

surround left, surround right, surround back left, and surround back

right speakers.

⁄0 Speaker outputs terminals (for Multi

room)

Two terminals are provided for the left and right speakers for

Multiroom(2

zone)

Notes:

• Connect the these jacks to the matching + or – terminals on your

speakers. When making speaker connections, always make

certain to maintain correct polarity by connecting the red (+)

terminals on the SR9300 to the red terminals on the speaker and

the black (–) terminals on the SR9300 to the black terminals on

the speakers.

⁄1 AC INLET

Plug the supplied power cord into this AC INLET and then into the

power outlet on the wall.

⁄2 AC OUTLETS

Connect the AC power cables of components such as a DVD and CD

player to these outlets. SWITCHED and UNSWITCHED outlets are

provided.

The one marked SWITCHED provides power only when the SR9300

is turned on and is useful for components which you use every time

you play your system.

The one marked UNSWITCHED is always live as long as the SR9300

is plugged into a live outlet.

A component connected here may be left on permanently, or may be

switched off with its own power switch.

Caution:

• In order to avoid potential turn-off thumps, anything plugged in

here should be powered up before the SR9300 is turned on.

⁄3 VIDEO IN/OUT (TV, DVD, DSS, LD,

VCR1, VCR2)

These are the video inputs and outputs. There are 6 video inputs and

2 video outputs and each one includes both composite video and S-

video configurations. Connect VCRs, LD players, DVD players, and

other video components to the video inputs.

S-video sources can be viewed through the S-video outputs, and

composite sources can only be viewed through the composite output.

The 2 video output channels can be used to be connected to video

tape recorders for making recordings.

⁄4 AUDIO IN/OUT (CD, TAPE, CD-R, TV,

DVD, DSS, LD, VCR1, VCR2)

These are the analog audio inputs and outputs. There are 9 audio

inputs (6 of which are linked to video inputs) and 4 audio outputs (2 of

which are linked to video outputs). The audio jacks are nominally

labeled for cassette tape decks, compact disc players,DVD players

and etc.... The audio inputs and outputs require RCA-type connectors.

⁄5 7.1 CHANNEL INPUT

By connecting a DVD Audio player, SACD player, or other component

that has a multi channel port, you can playback the audio with 5.1

channel or 7.1 channel output.

⁄6 RS232C

The RS232C port is to be used in conjunction with an external

controller to control the operation of the SR9300 by using an external

device.

The RS232C port may also be used in the future to update the

operating software of the SR9300 so that it will be able to support new

digital audio formats and the like as they are introduced.

⁄7 REMOTE CONT. IN/OUT terminals

Connect to a Marantz component equipped with remote control (RC-

5) terminals.

⁄8 MULTI ROOM REMOTE IN/OUT

terminals

IN: Connect to multi-room remote control device, available from

your Marantz dealer.

OUT: Connect to the Marantz component equipped with remote

control (RC-5) terminals in another room (Second zone).

⁄9 DC TRIGGER output terminals

Connect a device that needs to be triggered by DC under certain

conditions (screen, power strip, etc…)

Use the system OSD setup menu to determine the conditions by which

these jacks will be active.

Note:

• This output voltage is for (status) control only, It is not

sufficient for drive capability.

¤0 External IR transmitter terminal

If the SR9300 is located inside a rack or cabinet that will not allow

infrared beams to transmit to 2way remote commander, you will need

to connect a IR transmitter to this output to be able to use the 2way

remote controller.

Then install the remote transmitter in an unblocked location where you

can easily receive IR signal.

Note:

• An optional remote transmitter kit is required.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-9300 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-9300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info