Bedienungsanleitung Marantz SR-9300 (Seite 47 von 57) (Englisch)

6612

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

ENGLISH

OTHER FUNCTION

TV AUTO ON/OFF FUNCTION

This function allows the component connected to the TV-VIDEO in

jack to control the power (ON/OFF) to the SR9300.

AUTO POWER ON

Be sure TV auto mode is ENABLE. (Refer page 34 : System

Setup)

Connect your TV TUNER (etc) to the TV-VIDEO in terminal. Be

sure to connect the VIDEO input.

Turn OFF the power to the TV TUNER and the SR9300.

Turn ON the TV TUNER and tune in a receivable station.

When the station is received, the SR9300 turns ON and TV is

selected automatically.

AUTO POWER OFF

In the above situation, turn the TV TUNER OFF or select a

channel that does not contain any broadcast.

The power to the SR9300 switches to STANDBY after approx. 5

minutes.

Notes:

• AUTO POWER OFF is canceled if the SR9300 is set to a source

other than TV.

The function reactivates when TV is selected again.

• Some TV broadcasts may cause the TV AUTO FUNCTION to

turn ON.

• S-Video terminal does not support “TV AUTO ON/OFF” function.

ATTENUATION TO ANALOG INPUT SIGNAL

If the selected analog audio input signal is greater than the capable

level of internal processing, “PEAK” indicator will light up on the front

display. If this happens, you should press the ATT button or tap ATT

on the remote.

“ATT” indicator will light up when this function is activated. The signal-

input level is reduced by about the half. Attenuation will not work with

the output signal of TAPE-OUT, CD-R/MD-OUT, VCR1-OUT, VCR2-

OUT and MULTI ROOM OUT.

This function is memorized for each individual input source.

LISTENING OVER HEADPHONES

This jack may be used to listen to the SR9300’s output through a pair

of headphones. Be certain that the headphones have a standard 1/4"

stereo phone plug. (Note that the main room speakers will

automatically be turned off when the headphone jack is in use.)

Notes:

• When using headphones, the surround mode will automatically

change to STEREO.

• The surround mode returns to the previous setting as soon as the

plug is removed from the jack.

VIDEO ON/OFF

When no video signals of a DVD, etc., are connected to the SR9300 or

the DVD, etc., are connected directly to a TV, the unnecessary video

circuit can be turned off by selecting the “VIDEO OFF” setting.

To select video off condition, tap Video off on the remote.

Notes that VIDEO OFF will not work with the output signal of VCR1-

OUT and VCR2-OUT and MULTI ROOM OUT.

DISPLAY MODE

You can select the display mode for the front display of the SR9300.

To select this mode, press DISP button on the front panel or tap

Display on the remote control unit.

When this button is pressed, the display mode is switched in the

following sequence.

→ Auto-display Off → Display Off → Normal → Auto-display Off ....

In Auto display off mode, turn the display on automatically, after that

any condition of SR9300 is changed.

In Display off mode, turn the display off completely.

Notes:

• Only Disp will light up on the front display in display off

condition

SELECTING ANALOG AUDIO INPUT OR

DIGITAL AUDIO INPUT

If you have already assign any digital input to input source.

You can select temporarily the audio input mode for each input source

with A/D button on the remote controller or front panel.

When this button is pressed, the input mode is switched in the

following sequence.

→ Digital Auto → Digital → Analog → Digital Auto....

In Digital Auto mode, the types of signals being input to the digital and

analog input jacks for the selected input source are detected

automatically.

If no digital signal is being input, the analog input jacks are selected

automatically.

In Digital mode, input is fixed to an assigned digital input terminal.

In analog mode, the analog input jacks are selected.

This selecting is temporarily, so the result will not be stored in memory.

If you need to change input mode completely, use SYSTEM SETUP in

OSD menu system.(see page 31)

VOLUME

UPDOWN

MUTE ATT

7.1CH-IN

DSS TAPE CD-R TUNERCDTV VCR 1 VCR2/DVD-R

MULTI-SPK

ULTI ROOM

AUX1S-DIRECT

AUX2A/D

SLEEP

AUTO-TUNE

GYRO TUNINGDOWN UP

T-MODEF/P

AUX1 INPUT

AUDIO

VIDEO

S-VIDEO

DIGITAL

MEMO

CLEAR

LAY

DVD

POWER ON/STANDBY

STANDBY

PHONES

SELECT ENTER

7.1CH-IN

LD DSS TV VCR 1

MULTI-SPK

MULTI ROOM

AUX1S-DIRECT

AUX2A/D

SLEEP

GYRO TU

DOWN

MEMO

CLEARDISPLAY

DVD

POWER ON/STANDBY

STANDBY

PHONES

SELECT ENTER

SELECTOR

7.1CH-IN

LD DSS TAPE CD-RCDTV VCR 1 VCR2/DVD-R

MULTI-SPK

MULTI ROOM

AUX1S-DIRECT

AUX2A/D

SLEEP

AUTO-TUNE

GYRO TUNINGDOWN UP

T-M

F/P

AUX1 INPUT

AUDIO

VIDEO

S-VIDEO

DIGITAL

MEMO

CLEARDISPLAY

DVD

POWER ON/STANDBY

STANDBY

PHONES

SELECT ENTER

SELECTOR

7.1CH-IN

LD DSS TAPE CD-RCDTV VCR 1 VCR2/DVD-R

MULTI-SPK

MULTI ROOM

AUX1S-DIRECT

AUX2A/D

SLEEP

AUTO-TUNE

GYRO TUNINGDOWN UP

T-M

F/P

AUX1 INPUT

AUDIO

VIDEO

S-VIDEO

DIGITAL

MEMO

CLEARDISPLAY

DVD

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR-9300 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR-9300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info