Bedienungsanleitung Marantz SR12S1 (Seite 35 von 58) (Englisch)

570389

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

ENGLISH

INPUT SETUP (ASSIGNABLE DIGITAL INPUT)

Nine digital inputs can be assigned as the desired source.

Use this menu to select the digital input jack to be assigned to the

input source.

Select “INPUT SETUP” in MAIN SETUP MENU with Up or Down

cursor button, and press the OK button.

To select the input source, press Up or Down cursor button.

To select the digital input jack , press the Left or Right cursor

buttons.

Select “Dx-AT” for input sources, for automatic detection of the

digital input signal condition.

If no digital signal is input, the input signals to the analog input

jacks will be played.

Select “Dig x” for input sources, for fixed the digital input jack.

Select “ANA” for input sources for which no digital input jacks are

used.

If you finish the setup in this sub-menu, move cursor to MAIN with

Up or Down cursor buttons and press OK button.

Notes:

• The TUNER is fixed to the analog input, and cannot be selected

for any digital input.

• When a DTS-LD or DTS-CD is playing, this setup is not

available. This is to avoid noise being generated from the

analog input.

• If “Dx-AT” is selected and a DVD, compact disc or LD is fast-

forwarded during playback, decoded signals may produce a

skipping sound. In such cases, change the setting to DIGITAL.

SPEAKER SETUP

After you have installed the SR-12S1, connected all the components,

and determined the speaker layout, it is now time to

perform the settings in the Speaker Setup menu for the optimum

sound acoustics for your environment and speaker layout.

Before you perform the following settings, it is important that you first

determine the following characteristics:

Note:

• You can not entry these setup, when you use MULTI

SPEAKER function.

SPEAKER SIZE

When setting the speaker size in the SPEAKER SIZE sub-menu, use

the guidelines given below.

Large: The complete frequency range for the channel you are setting

will be output from the speaker.

Small: Frequencies of the channel you are setting lower than 80 Hz

will be output from the subwoofer.

If the Subwoofer is set to “NONE” and the front speakers are

set to “Large,” then the sound may be output from both the left

and right speakers.

Select “SPEAKER SETUP” in MAIN SETUP MENU with Up or

Down cursor button, and press the OK button.

To select the each speaker , press Up or Down cursor button.

To select the setting of size to each speaker, press the Left or

Right cursor buttons.

If you finish these setup, move cursor to “NEXT” with Up or Down

cursor button and then press OK button to go to next page.

THX SPEAKER SYSTEM

YES : If you use full THX speaker systems which are approved by

LUCASFILM LTD. The front, center and surround speaker size

will be “Small” and the subwoofer will be “Yes”.

You need to set number of surround back speaker only.

NO : You desire to set each speaker size setup.

SUBWOOFER:

YES: Select when a subwoofer is connected.

NONE: Select when a subwoofer is not connected.

FRONT L/R

LARGE: Select if the front speakers are large sized.

SMALL: Select if the front speakers are small sized.

• If “NONE” is selected for the Subwoofer setting, then this

setting is fixed to “Large.”

CENTER

NONE: Select if no center speaker is connected.

LARGE: Select if the center speaker is large sized.

SMALL: Select if the center speaker is small sized.

SURROUND L/R

NONE: Select if no surround left and right speakers are connected.

LARGE: Select if the surround left and right speakers are large sized.

SMALL: Select if the surround left and right speakers are small sized.

SURR. BACK

NONE: Select if no surround back left and right speakers are

connected.

2CH: Select if surround back left and right speakers are connected.

1CH: Select if the one surround back speaker connected.

• If “None” is selected for the Surround L/R setting, then this

setting is fixed to “None.”

• Required for enjoying THX Surround EX audio.

Lucasfilm/THX recommends the use of two Surround Back

speakers to enjoy the full potential of THX Surround EX..

However, if you are unable to position two speakers in your

listening environment, a single surround speaker can be used. In

this case, connect this speaker to Surr Back Left Speaker

terminal and you will also need to make the appropriate setting

SURR BACK=1CH

SURR. BACK SIZE

LARGE: Select if the surround back speakers are large sized.

SMALL: Select if the surround back speakers are small sized.

• If “None” is selected for the Surround L/R setting, then this

setting is not available.

1INPUTSETUP

CD : D6 - AT TV :D4 - AT

TAPE :ANA DSS : D3 - AT

CD - R : D1 -AT DVD : D5 - AT

VCR1 : ANA

VCR2 : ANA

LD : D2 - AT

AUX 1 : D -AT

MA I N E X I T

2-1 SPEAKERS SIZE

THX SPKR SYSTEM : YES

SUBWOOFER : YES

FRONT L/R : SMALL

CENTER : SMALL

S URROUND L / R : SMAL L

S URR . BACK : 2CH

S URR . BACK S I ZE : SMAL L

MA I N NE X T E X I T

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR12S1 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR12S1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info