Bedienungsanleitung Marantz SR12S1 (Seite 54 von 58) (Englisch)

570389

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

ENGLISH

MULTI ROOM SYSTEM

The Multi Room system is a function which allows you to listen to the

same or a different source in a room other than the room in which the

SR-12S1 is located.

To use this function, a multi room remote unit and remote control

signal receiver available from your Marantz dealer are necessary.

The operations possible with the multi room function are explained

briefly below.

For details, refer to the instruction manual supplied with the multi room

remote control unit and receiver.

When the outputs of the MULTI ROOM OUT terminals are wired and

connected to amplifiers installed in other rooms or MULTI SPEAKER

OUT terminals are wired and connected to L&R speakers in other

room, different sources can be played in rooms other than the main

room in which this unit and the playback devices are installed.

SR-12S1 has some feature to MULTI ROOM SYSTEM as source

selector, OSD information, sleep timer, Multi Room Speaker output

and remote control.

MULTI ROOM PLAYBACK USING THE

MULTI ROOM OUT TERMINALS

The SR-12S1 is equipped with audio pre-out terminals for which the

volume is adjustable and composite video output terminals as the

MULTI ROOM output terminals.

A separately sold stereo power amplifier (PM8100) can be connected

to enjoy multi room playback.

Operation to MULTI ROOM OUT without the remote controller.

Press the MULTI ROOM button. The unit enters multi room mode

and the display indicates “SELCT SOURCE” and flashes the

“MULTI” indicator for approx. 10 seconds.

In this time, you can select the input source by pressing the input

selector buttons.

Then, the display indicates “MULTI VOL” “VOLUME xx dB” for

approx. 5 seconds.

During this time, you can set the volume level in the multi room as

desired.

This will only set the volume in the second room.

If you desire to set sleep timer to multi room, tap the Sleep on the

remote to setup the time.

MULTI ROOM PLAYBACK USING THE

MULTI SPEAKER TERMINALS

The SR-12S1 allows you to connect another set of speakers and place

them in a different room or separated area for listening to music.

Operation to MULTI ROOM SPEAKER without the remote controller.

Press the MULTI SPKR button. The unit enters multi room mode

and the display indicates “SELCT SOURCE” and flashes the

“MULTI” & “M-SPKR” indicators for approx. 10 seconds.

In this time, you can select the input source by pressing the input

selector buttons.

Then, the display indicates “MULTI VOL” “VOLUME xx dB” for

approx. 5 seconds.

During this time, you can set the volume level in the multi room as

desired.

This will only set the volume in the multi room.

If you desire to set sleep timer to multi room, tap the Sleep on the

remote to setup the time.

Notes for MULTI ROOM SPEAKER

• MULTI ROOM SPEAKER On/ Off is available in main room

only.

• You can not play the source in 7.1ch playback mode as THX-

Surr EX, DTS-ES in the main zone, when MULTI ROOM

SPEAKER is active. In other words, the condition of main

room is same as "Surr Back Speaker = None" setting.

• You can not turn MULTI SPEAKER on, when you set Speaker

setup in OSD menu.

OPERATION TO MULTI ROOM OUTPUTS

WITH THE REMOTE CONTROLLER FROM

SECOND ROOM.

Tap the MULTI ROOM on on multi room remote control unit from

the MULTI ROOM.

This operations will put the SR-12S1 into multi room mode and

“MULTI” will light in the display.

MULTI ROOM Video output will show OSD information to

condition of MULTI ROOM setup.

Press the VOL + or VOL – button on the multi room remote control

unit to set the desired sound volume.

In multi room mode, the multi room remote control unit can be

used in the multiroom to operate the following functions.

General:

Controlling volume level, sleep timer, and muting. Selecting

input audio and video source

Tuner:

Selecting band, controlling preset channel up and down, tuning

up and down, direct frequency call.

Notes for multi room system:

• The MULTI ROOM OUT and MULTI SPEAKER terminals are

analog outputs.

These are not support to digital signals input.

If no sound is heard from the selected input source, check if the

component is connected to the analog inputs.

• If Tuner (FM, LW or AM) is active in main room, you can not

control any function of tuner.

In this case, You can listen the same condition as main room.

DIGITAL

AV SURROUND RECEIVER SR-12S1SURROUND

POEWER ON/OFF

DOWN

VOLUME

PHONES

AUDIO

AUX1

AUX1 INPUT

MEMOAUX2 CLEARATT

VIDEO

TV CD-R/MD

S-DIRECT

TAPECDDSS

MULTI ROOM

LD VCR2/DVD-R

TUNER

F/P

T-MODE

GYRO TUNINGDOWN UP

STAMDBY

VCR1DVD

7.1CH INPUT

S-VIDEO

MULTI SPKR

AUTO TUNE

3.1.

DIGITAL

AV SURROUND RECEIVER SR-12S1SURROUND

POEWER ON/OFF

DOWN

VOLUME

PHONES

AUDIO

AUX1

AUX1 INPUT

MEMOAUX2 CLEARATT

VIDEO

TV CD-R/MD

S-DIRECT

TAPECDDSS

MULTI ROOM

LD VCR2/DVD-R

TUNER

F/P

T-MODE

GYRO TUNINGDOWN UP

STAMDBY

VCR1DVD

7.1CH INPUT

S-VIDEO

MULTI SPKR

AUTO TUNE

3.1.2.

MUL T I ROOM

MU L T I ROOM : OF F

MU L T I SPKR : OF F

VIDEO : DVD

AUD I O : DVD

VOLUME SETUP : VAR I ABLE

VOLUME LEVEL : - 90 dB

SLEEP T IMER : OFF

- ---MAIN-ROOM STATUS----

VIDEO:DVD AUD IO : DVD

MA I N E X I T

Marantz SR12S1 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR12S1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info