Bedienungsanleitung Marantz SR14 MKII (Seite 12 von 35) (Englisch)

522824

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

ENGLISH

FRONT PANEL FEATURES

(SEE PAGE iv)

q POWER switch and STANDBY indicator

You can turn on and off the unit’s power using the front panel power

switch.

However, if you turn the unit off with the front panel switch, the unit

goes completely off rather than to the “standby mode” (Red LED

indicator light glows in the standby mode).

The unit cannot be turned on with the remote control when it is not in

the standby mode. When the red LED is on, the unit can be turned on

via the remote control or by pressing any input selector button on the

front panel.

w PHONES jack for stereo headphones

This jack may be used to listen to the SR-14mkII’s output through a

pair of headphones. Be certain that the headphones have a

standard 1 /4" stereo phone plug. Note that the main room speakers

will automatically be turned off when the headphone jack is in use.

Notes:

• When using headphones, the surround mode will automatically

change to STEREO .

• The surround mode returns to the previous setting as soon as the

plug is removed from the jack.

e Surround MODE buttons

(AUTO, 2 (DOLBY), THX, THX-EX, DTS, DSP, 5CH

STEREO, STEREO/MONO , S-DIRECT )

Press the desired button to select surround mode.

AUTO :

The receiver determines whether the digital input signal is Dolby

Digital, PCM-audio , HDCD or DTS.

2 :

This mode is used with source materials encoded in Dolby Digital

and Dolby Surround.

THX (THX Cinema or THX EX) :

THX Cinema mode applies additional processing to Dolby Digital,

DTS, and Dolby Pro Logic multi-channel surround sources. Use the

THX Cinema mode for all movies on disc, tape or broadcast.

THX-EX :

THX Surround EX will operate for any 5. 1 channel source whenever

THX is activated.

DTS (Cinema or Music) :

This mode is for DTS encoded source materials such as LASER

DISC, CD, and DVD. Press this button to select DTS-Cinema

mode. Press it again to select DTS-Music mode.

DSP (HALL, MATRIX, MOVIE):

These modes apply additional surround processing to each source

for theater, concert hall and stadium like atmospheres. Choice

desired effect by pressing this button.

5CH STEREO:

This mode is used to create a wider, deeper and more natural

soundstage from two channel source material.

STEREO/ MONO :

STEREO mode bypasses all surround processing.

MONO mode is intended for use with old movies, televisions shows

and other programs that have a monaural sound track.

S. (Source) DIRECT :

In the source direct mode, the tone control circuit and bass

management configuration are bypassed for full range frequency

response and the purist audio reproduction.

(See page 22 for more information about surround modes.)

r A/D (Analog/Digital) SELECTOR

BUTTON

This is used to select between the analog and digital inputs.

Note:

• This button is not used for an input source that is not set to a

digital input in the system setup2/2.

t ATT (Attenuate) button

If the selected analog audio input signal is greater than the capable

level of internal processing, PEAK indicator will light. If this happens,

you should press the ATT button. “ATT” is displayed when this

function is activated.

The signal-input level is reduced by about the half. Attenuation will

not work with the output signal of “REC OUT” (TAPE, CD-R/MD, VCR1

and DSS/VCR2 output). This function is memorized for each

individual input.

y BAND (Tuner Band Selector) button

Press this button to switch the tuner between AM or FM.

u FM MODE button

Press this button to select the auto stereo mode or mono mode when

the FM band is selected. The AUTO indicator lights in the auto stereo

mode.

i MEMO (memory) button

Press this button to enter the tuner preset memory numbers or station

names.

o CL (Clear) button

Press this button to cancel the station-memory setting mode or preset

scan tuning.

!0 D. (Digital) COPY button

Press this button for digital dubbing to a CD-R recorder or MD deck.

When this button is pressed, the digital source of the DIGITAL

OUTPUT is switched in the following sequence.

SOURCE DIG.1 DIG.2 DIG.3

(DIG.6) DIG.5 DIG.4OFF

!1 TAPE COPY button

Press this button for audio dubbing to a tape deck.

When this button is pressed, the source from the TAPE OUT is

switched in the following sequence.

SOURCE TUNER CD CD-R/MD

!2 VCR1 COPY button

Press this button for video and audio dubbing to a VCR1 deck.

When this button is pressed, the source from the VCR1 OUT is

switched in the following sequence.

SOURCE TV LD DVD DSS/VCR2 AUX

!3 BASS and TREBLE tone controls

These controls are used to boost or cut high and low frequencies.

TREBLE: Adjusts the tone of high-frequency sound.

BASS: Adjusts the tone of low-frequency sound.

press the up and down keys simultaneously to set . flat frequency

response

Notes:

• These buttons are disable in THX CINEMA mode,THX

SURROUND EX mode and Source Direct mode.

• Additionally these are not effective during playback of a HDCD

signal or 96k PCM audio signal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR14 MKII Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info