Bedienungsanleitung Marantz SR4003 (Seite 24 von 48) (Englisch)

61338

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

ENGLISH

BASIC

CONNECTIONS

BASIC OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTIONS

SETUP

1 INPUT SETUP (ASSIGNABLE DIGITAL

INPUT AND COMPONENT VIDEO INPUT)

Use this menu to select the input jack to be assigned

to the input source.

Select “INPUT SETUP” in SETUP MAIN

MENU with 3 or 4 cursor button, and press the

ENTER button.

1-1 INPUT SETUP

FUNC:MODE :DIG:HDMI:COMP

------------------------

TV :AUTO : - : - : -

DVD :AUTO : 1 : 1 : 1

VCR :AUTO : 3 : 3 : 3

DSS :AUTO : 2 : 2 : 2

AUX1:AUTO : F : - : -

MAIN NEXT EXIT

1-2 INPUT SETUP

FUNC:MODE :DIG:HDMI:COMP

------------------------

TAPE:AUTO : - : :

CD/R:AUTO : 4 : :

AUX2:AUTO : - : :

MAIN RETURN EXIT

To select the input source and MODE, press

the 3 or 4 cursor buttons.

To select

“DIG”

“HDMI” or “COMP” for the input

jack, press the 1 or 2 cursor buttons.

Select “AUTO” for input sources, for automatic

detection of the digital input signal condition.

If there is not a digital signal present, but there

is an analog signal present, the analog signal

will be played.

Select “DIG”, when only a digital signal will be

used.

Select “ANA” for input sources for which

no digital input jacks are used.

To select the vdieo source, select “HDMI” or

“COMP” by pressing the 3 or 4 cursor buttons,

and press the 1 or 2 cursor buttons to select

the vdieo source to be assigned .

After you complete this portion of the set up,

move the cursor to MAIN with the 3 or 4 cursor

buttons and press the ENTER button.

Notes:

• When the TUNER is ﬁ xed to the analog input, you

can not select any digital input.

• When a DTS-LD or DTS-CD is playing, this setup is

not available. This is to avoid noise being generated

from the analog input.

• If “AUTO” is selected and a DVD, compact disc

or LD is fast-forwarded during playback, decoded

signals may produce a skipping sound. In such cases,

change the setting to “DIG”.

2 SPEAKER SETUP

After you have installed the unit, connected all the

components, and determined the speaker layout, it

is now time to perform the settings in the Speaker

Setup menu for the optimum sound acoustics for

your environment and speaker layout.

Before you perform the following settings, it is

important that you first determine the following

characteristics:

Select “SPEAKER SETUP” in SETUP MAIN

MENU with 3 or 4 cursor button, and press the

ENTER button.

2-1 SPEAKER SETUP

Speakers are set up by selecting either MANUAL

or AUTO using the 1 and 2 cursor buttons. For

operation when AUTO has been selected, see

MRAC on page 23.

2-1 SPEAKER SETUP

SPEAKER SETUP : MANUAL

MAIN NEXT EXIT

2-2 SPEAKERS SIZE

When setting the speaker size in the SPEAKER SIZE

sub-menu, use the guidelines given below.

LARGE:

The complete frequency range for the channel you

are setting will be output from the speaker.

SMALL:

Frequencies of the channel you are setting lower

than approx. 100 Hz will be output from the

subwoofer.

If the Subwoofer is set to “NONE”, the setting of

the front speakers will be ﬁ xed to “LARGE,” and

the sound will be output from both the left and

right speakers.

2-2 SPEAKERS SIZE

SUBWOOFER : YES

FRONT L/R : LARGE

CENTER : SMALL

SURROUND L/R : SMALL

SURR.BACK : 2CH

SURR.BACK SIZE : SMALL

LPF/HPF : 100Hz

BASS MIX : BOTH

MAIN NEXT EXIT

To select the each speaker, press the 3 or 4

cursor buttons.

To select the setting of each speaker size,

press the 1 or 2 cursor buttons.

After you complete this portion of the set up,

move the cursor to “NEXT” with the 3 or 4

cursor buttons and then press the ENTER

button to go to the next page.

SUBWOOFER:

YES:

Select when a subwoofer is connected.

NONE:

Select when a subwoofer is not connected.

FRONT L/R

LARGE:

Select if the front speakers are large.

SMALL:

Select if the front speakers are small.

• If “NONE” is selected for the Subwoofer setting,

then this setting is ﬁ xed to “LARGE.”

CENTER

NONE:

Select if no center speaker is connected.

LARGE:

Select if the center speaker is large.

SMALL:

Select if the center speaker is small.

SURROUND L/R

NONE:

Select if no surround left and right speakers are

connected.

LARGE:

Select if the surround left and right speakers are

large.

SMALL:

Select if the surround left and right speakers are

small.

SURR. BACK

NONE:

Select if no surround back left and right speakers

are connected.

2CH:

Select if the surround back left and right speakers

are connected.

1CH:

Select if the one surround back speaker is

connected.

In this case, the audio signal is emitted form the

Surround back L output terminal.

SR4003_U_01_E2_2.indd 21SR4003_U_01_E2_2.indd 21 08.6.20 5:06:26 PM08.6.20 5:06:26 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR4003 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR4003

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info