Bedienungsanleitung Marantz SR4023 (Seite 18 von 24) (Englisch)

522863

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

BASIC

CONNECTIONS

BASIC

OPERATION

ADVANCED

CONNECTIONS

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTIONS

ADVANCED

OPERATION

ENGLISH

ADVANCED OPERATION

AMPLIFIER OPERATION

USING THE SLEEP TIMER

To program this unit for automatic standby, press the

SLEEP button on the remote controller.

Each press of the button will increase the time before

shut down in the following sequence.

OFF 10 20 30 50

120 90 80 70 60100110

The sleep time will be shown for a few seconds in the

display on the front panel, and it will count down until

the time has elapsed.

When the programmed sleep time has elapsed, the

unit will automatically turn off.

Note that the SLEEP indicator on the display will

illuminate when the Sleep function is programmed.

To cancel the Sleep function, press the SLEEP

button until the display shows “SLEEP OFF” and the

SLEEP indicator will disappear.

RECORDING A SOURCE

In normal operation, the audio or video source

selected for listening through the SR4023 is sent to

the record outputs.

This means that any program you are watching

or listening to may be recorded simply by placing

machines connected to the outputs for RECORDER1

OUT, RECORDER2 OUT, and VCR OUT in the

record mode.

To record the input source signal you are currently

watching or listening to

STANDBY

POWER ON/STANDBY

DIMMERS.DIRECT

INPUT

SELECTOR

PHONES

Select the input source to record by pressing

the corresponding input selector button.

The input source is now selected and you may

watch or listen to it as desired.

The currently selected input source signal is

output to the

RECORDER 1 OUT, RECORDER 2

OUT, and VCR OUT outputs for recording.

Start recording to the recording component as

desired.

Recording the video from one source and the

audio from another

You can add the sound from one source to the

video of another source to make your own video

recordings.

Below is an example of recording the sound from

a compact disc player connected to CD IN and the

video from a video camera connected to AUX IN to

video cassette recorder connected to the VCR OUT

jack.

STANDBY

POWER ON/STANDBY

DIMMERS.DIRECT

INPUT

SELECTOR

PHONES

Press the AUX input source button to set video

output.

Press the CD input source button to set audio

output.

Now “CD” has been selected as the audio input

source and “AUX” as the video input source.

Notes:

• If you change the input source during recording, you

will record the signals from the newly selected input

source.

• The setting of BASS, TREBLE, VOLUME, MUTE

does not affect the recorded material.

• A given input source does not output on the same

OUT channel (For example, the signal input from

VCR IN is not output on VCR OUT).

• If you playback a video source that uses scrambled

or encoded signals to prevent it from being dubbed,

the picture itself may be disturbed due to those

signals.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR4023 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR4023

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info