Bedienungsanleitung Marantz SR5002 (Seite 13 von 56) (Englisch)

477845

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ENGLISH

!0 Subwoofer Output

Connect this jack to the line level input of a powered

subwoofer. If an external subwoofer ampliﬁ er is used,

connect this jack to the subwoofer ampliﬁ er input.

If you are using two subwoofers, either powered or

with a 2 channel subwoofer ampliﬁ er, connect a “Y”

connector to the subwoofer output jack and run one

cable from it to each subwoofer ampliﬁ er.

!1 7.1 CHANNEL or AUX2 INPUT

By connecting a DVD Audio player, Super Audio CD

multichannel player, or other components that has a

multichannel port, you can playback the audio with

5.1 channel or 7.1 channel outputs.

!2 Multiroom Outputs (SR5002 only)

These are the audio output jacks for the Multi zone

(Multi room).

Connect these jacks to optional audio power ampliﬁ ers

to listen the source selected by the multiroom system

in a remote room.

!3 REMOTE CONT. IN/OUT terminals

Connect to a Marantz component equipped with

remote control (RC-5) terminals.

!4 AUDIO IN/OUT (CD, TAPE, CD-R,

TV, DVD, VCR, DSS)

These are the analog audio inputs and outputs.

There are 6 audio inputs (4 of which are linked

to video inputs) and 3 audio outputs (1 of which

are linked to video outputs). The audio jacks are

nominally labeled for cassette tape decks, compact

disc players, DVD players and etc.... The audio inputs

and outputs require RCA-type connectors.

!5 DIGITAL INPUT

(SR4002 : Dig.1 - 4, SR5002 : Dig.1-5)

/ OUTPUT (optical)

These are the digital audio inputs and outputs.

The SR4002 has 2 digital inputs with coaxial jacks, 2

with optical jacks.

The SR5002 has 2 digital inputs with coaxial jacks, 3

with optical jacks.

The inputs accept digital audio signals from a CD,

DVD, or other digital source component.

For digital output, this is 1 optical output.

The digital outputs can be connected to MD recorders,

CD recorders, or other similar components.

!6 HDMI INPUT/OUTPUT

The SR4002 has 2 HDMI inputs and 1 HDMI output.

The SR5002 has 3 HDMI inputs and 1 HDMI output.

The input function can be selected from the

OSD

menu system

. (See page 27)

!7 DC TRIGGER output terminal

(SR5002 only)

Connect a device that needs to be triggered by DC

under certain conditions (screen, power strip, etc…)

Use the system OSD setup menu to determine the

conditions by which these jack will be active.

Note:

This output voltage is for (status) control only, It is not

sufﬁ cient for drive capability.

!8 FLASHER IN

(Flasher input terminal) (SR5002 only)

These terminals are to control the unit from each

zone. Connect the control signal from a Keypad, etc.

SPEAKER C SELECTOR SWITCH

(SR5002 only)

The terminals can be used to connect a third set of

speakers by setting the SPEAKER C selector switch

to ON. For connection and use, see page 24.

SR4002-5002N DFU_01_E1_2.indd 9SR4002-5002N DFU_01_E1_2.indd 9 07.7.9 1:40:36 PM07.7.9 1:40:36 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz SR5002 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Marantz SR5002

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info