48
ENGLISH
MULTI ROOM
SYSTEM
(SR5002 only)
The Multi Room system is a function which allows
you to listen to the same or a different source in a
room other than the room in which the SR5002 is
located.
The operations possible with the multi room function
are explained briefl y below.
For details, refer to the instruction manual supplied
with the multi room remote controller and SR5002.
When the outputs of the MULTI OUT terminals are
wired and connected to amplifi ers installed in other
rooms or M (MULTI) SPEAKER B terminals are
wired and connected to L&R speakers in other room,
different sources can be played in rooms other than
the main room in which the SR5002 and the playback
devices are installed.
SR5002 has some feature to MULTI ROOM SYSTEM
as source selector, sleep timer, Multi Room Speaker
output and remote control.
MULTI ROOM PLAYBACK USING THE MULTI
ROOM OUT TERMINALS
The SR5002 is equipped with audio pre-out terminals
for which the volume is adjustable as the MULTI
output terminals.
A separately sold stereo power amplifier can be
connected to enjoy multi room playback.
MULTI
SPEAKER
DIGITAL
RLVIDEO
S-VIDEO
AUX 1 INPUT
AUDIO
SETUP
SIMPLE
MULTI
PURE
T-MOD E
SURROUND
MEMORY
DISPLAY
ATT
MUTE
STANDBY
INPUT SELECTOR
VOLUME
UP
DOWN
AV SURROUND RECEIVER SR5002
DIRECT
AUTO
HT-EQ
EXIT
MENU
MODE
BAND
CLEAR
ENTER
PHONES
POWER ON/STANDBY
SETUP MIC
2. 3.1. 4.
CAT
CAT
-
T.DISP
F.DIRECT
PTY
TUNING
PRESET
-
++
+10
REMOTE CONTROLLER
00
BASS
TREBLE
MULTI/
MENU
SPKR A/B
ENTER
EXIT
INFO
CH/
T.TO NE
/SET UP
M-SPKR
MUTE
MD
CDR
CD
AMP
AUX2
TUNER
REC
AUDIO
ANGLE
SUB TITLE
DISC+
CH-SEL
V-OFF
ATT.
AUX1
MEMO
CL
DVDDVD VCRVCR
DSSDSS
TVTV
VOLUMEVOLUME
TAPE
1. 4.
2.
3.
1. 4.
1.
Press the MULTI button on the unit or remote
controller (after pressing the AMP button
on the remote controller). The unit enters
MULTI ROOM mode, and the display indicates
“SELECT SOURCE.” The “MULTI” indicator will
fl ash for about 10 seconds.
2.
Select the input source using the INPUT
SELECTOR knob or function button on the
remote controller.
Then, the display indicates “MULTI VOLUME”
“MULTI VOL. xx” for approx. 5 seconds.
3.
During this time, you can set the volume level in
the multi room as desired.
This will only set the volume in the second room.
4.
To cancel this function, press the MULTI button
on the unit or remote controller (after pressing
the AMP button on the remote controller).
“MULTI” indicator on the front panel will be
turned off.
MULTI ROOM PLAYBACK USING THE MULTI
SPEAKER TERMINALS
The SR5002 allows you to connect another set
of speakers and place them in a different room or
separated area for listening to music.
MULTI
SPEAKER
DIGITAL
RLVIDEO
S-VIDEO
AUX 1 INPUT
AUDIO
SETUP
SIMPLE
MULTI
PURE
T-MODE
SURROUND
MEMORY
DISPLAY
ATT
MUTE
STANDBY
INPUT SELECTOR
VOLUME
UP
DOWN
AV SURROUND RECEIVER SR5002
DIRECT
AUTO
HT-EQ
EXIT
MENU
MODE
BAND
CLEAR
ENTER
PHONES
POWER ON/STANDBY
SETUP MIC
2. 3.1. 4.
CAT
CAT
-
T.DISP
F.DIRECT
PTY
TUNING
PRESET
-
++
+10
REMOTE CONTROLLER
00
BASS
TREBLE
MULTI/
MENU
SPKR A/B
ENTER
EXIT
INFO
CH/
T.TO NE
/SET UP
M-SPKR
MUTE
MD
CDR
CD
AMP
AUX2
TUNER
REC
AUDIO
ANGLE
SUB TITLE
DISC+
CH-SEL
V-OF F
ATT.
AUX1
MEMO
CL
DVDDVD VCRVCR
DSSDSS
TVTV
VOLUM EVOLUME
TAPE
1. 4.
2.
3.
1. 4.
1.
Press the MULTI SPEAKER (M-SPKR) button.
The unit enters multi room speaker mode and
the display indicates “SELCT SOURCE” and
fl ashes the “MULTI” indicators for approx. 10
seconds.
2.
Select the input source using the INPUT
SELECTOR knob or function button on the
remote controller.
Then, the display indicates “MSPKR VOLUME”
“MSPKR VOL.–xx” for approx. 5 seconds.
3.
During this time, you can set the volume level in
the multi room as desired.
This will only set the volume in the multi room.
4.
To cancel this function, press the MULTI button
on the unit or remote controller (after pressing
the AMP button on the remote controller).
“MULTI” indicator on the front panel will be
turned off.
Notes for MULTI ROOM SPEAKER
• MULTI ROOM SPEAKER On/ Off is available in
main room only.
• MULTI ROOM SPEAKER output terminals can
be used when the SURROUND BACK SPEAKER
is set NONE in SPEAKER SETUP menu. (See
SPEAKER SETUP, page 27)
• “The Surr. Back Speakers are in use” is displayed
by pressing the MULTI SPEAKER (M-SPKR)
button when the SURROUND BACK SPEAKER is
set except NONE in SPEAKER SETUP menu. (See
SPEAKER SETUP, page 27)
SR4002-5002U DFU_01_E2_2.indd 48SR4002-5002U DFU_01_E2_2.indd 48 07.7.9 2:47:43 PM07.7.9 2:47:43 PM
